Samsung VC-7400 free download

File name VC-7400.pdf

¤Samsung Electronics Co., Ltd. Jan. 1999. Printed in Korea Code No. DJ68-00037A VACUUM CLEANER VC-7400 SERIES VACUUM CLEANER CONTENTS 1. Precautions 2. Disassembly and Reassembly 3. Exploded Views and Parts List 4. Schematic Diagram 1. Precautions Technical service information contained here is supplied for use by qualified service personnel. Specifications are subject to change without notice. 1. Do not use the vacuum cleaner when rug or floor is wet. 2. Close supervision is necessary when any appliance is used by or near children. Do not allow the vacuum cleaner to run unattended at any time. 3. Do not use the vacuum cleaner without a dust bag. Replace the dust bag frequently when picking up very fine material such as powder. Replace the dust bag before it is excessively full in order to maintain optimum performance. 4. Never use the vacuum cleaner to pick up matches, live ashes or cigarette butts. Keep the vacuum cleaner away from stoves or heat source. Heat can deform and discolour the plastic parts of the unit. 5. Avoid picking up hard or sharp objects with the vacuum cleaner. Do not stand on the hose assembly, put a weight on the hose or block the suction or exhaustion part. 6. Unplug the cleaner when not in use. Turn off the power switch before unplugging. 7. Grasp the plug firmly when removing it. To avoid damage to cord, plug, prongs or socket, always disconnect the cord from the electrical outlet before replacing the dust bag or servicing the cleaner. 8. The use of an extension cord is not recommended. 9. Repairs should be done only by an qualified serivce personnel. SAMSUNG ELECTRONICS., LTD 1 2. Disassembly and Reassembly 2-1 Removal of Button-C/Reel and Button-Switch Detach the BUTTON with a flat head screw driver. 2-2 Removal of Panel Loosen the three screws and detach PANEL-CONTROL. 2-3 Disassembly of Cover-Dust ASS'Y Loosen the two screws and detach lthe COVER-INDICATOR, INDICATOR ASS'Y, and DAMPER ASS'Y. 2 SAMSUNG ELECTRONICS., LTD 2-4 Disassembly of Main Body-control / Removal of Main PCB Assembly Loosen the four screws and grasp both sides of the BODY-CONTROL. Lift it upwards, Separate the WIRE ASS'Y from the PCB-MAIN ASS'Y. 2-5 Motor Replacement 1. Loosen the two screws and separate COVER-MOTOR from the body. 2. Separate MOTOR and WIRE-HARNESS MOTOR. yy ;; yy ;; yy ;; yy ;; yy ;; yy ;; 2-6 Cord-Reel Replacement 1. Disassemble the GUARD-CORD with a flat head driver. (Insert it into the gap and push the hook to the opposite side.) yyy ;;; yyy ;;; yyy ;;; SAMSUNG ELECTRONICS., LTD 3 2. Separate the CORD-REEL from the main body. yyy ;;; yyy ;;; 3. Hold the COVER REEL, and wind the power cord to the left 4~5 times. 4. After winding, assemble the CORD-REEL to the body. yy ;; yy ;; yy ;; 4 SAMSUNG ELECTRONICS., LTD 3. Exploded Views and Parts List 3-1 Assembly-Body yyyy ;;;; yyyy ;;;; yyy ;;; yyy ;;; yyy ;;; yyy ;;; SAMSUNG ELECTRONICS., LTD MODEL : COMMON PART Location No. 1-2 1-3 1-4 1-7 2 3 4 5 6 8 9