Information about the files in archive: |
Decompress result: | OK |
Extracted files: | 4 |
File name | | Text |
Chap01.pdf | | Chapter 1
1. Features
Introduction
This machine has following features. High capacity ADF with high-speed scanning: The DP80F/DP85F scans one Letter (A4) size document page in 3 seconds (line density 8 dots/mm x 3.85 lines/mm) and stores it into memory. A maximum of up to 30 letter (A4) sheets may be placed into the ADF at one time. High-speed transmission: The DP85F uses a V.34 modem designed for 33,600 bps communications. The DP80F has a standard V.17 modem that is capable of 14,400 bps communications. Multi-access: Using the multi-access facility, multiple processes can be performed in parallel. Functions, such as transmission reservation during reception, copying during memory transmission/reception, etc. Maximizing the DP80F/DP85F's high-speed scanning and multi-access capabilities provides maximum office productivity and efficiency. Patterns of the multi-access are as follows: (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) Scan to Memory during Memory Transmission Scan to Memory duri |
Chap02.pdf | | Chapter 2
Scanning method:
Specifications
Flat scanning by CIS (Fed step by step using a pulse motor) Pure green LED array (Wave length: 525nm) A4-size document: 214mm (8.34 inches) ±1% B4-size document: 254 mm (9.92 inches) ±1% Scanning position detected by a photo-interrupter. Document leading edge: 2.5 ±2 mm (0.1 ±0.08 inches) Document trailing edge: 0 mm+2.5 mm
a Max. 4.5mm b c d
1. Scanning System
Light source: Effective scanning width:
Details of effective scanning width:
Effective scanning range
Fig. 2-1
Unit: mm Paper size Letter Legal A4 B4 a: 1-line width d: White mask (R) a 216 216 210 256 b 1 1 0 1 c 214 214 214 254 d 1 1 0 1 Mode Transmission/Copy Transmission Transmission/Copy Transmission
b: White mask (L)
c: Effective scanning width
· The effective scanning width has a mechanical error range of 1.5. · For calculating into a pels value, multiply each value by 8 (i.e. 8 pels per mm).
March 2000 © TOSHIBA TEC
2-1
DP80F/DP85F Specifications
Scanning d |
Chap03.pdf | | Chapter 3
Installation
1. Installation Procedure
Follow the procedure below for installing the machine:
Start
Preparation
(Refer to page 3-2)
Unpacking
(Refer to page 3-4)
Accessories
(Refer to pages 3-7)
Attaching the accessories
(Refer to page 3-8 to 3-18)
Attaching the hardware options
(Refer to pages 3-19 to 3-28)
Connect the machine to power and telephone lines
(Refer to page 3-29)
Memory Clear
(Refer to page 3-30)
Country setting operation
(Refer to pages 3-31 to 3-32)
Function setting
(Refer to page 4-1)
Distinctive Ring setting (US/AU/HK)
To use the Distinctive Ring function, first explain the function to the user and confirm the type of Distinctive Ring provided by the telephone company. Then, make the following settings. 1. Set Bit 3 of FUNC 35 in service settings to "1." (Refer to page 4-105.) 2. Set the options for Distinctive Ring by referring to user function settings. (Refer to page 4-20.)
End
March 2000 © TOSHIBA TEC
3-1
DP80F/DP85F Installation |
Chap04.pdf | | Chapter 4
Function Settings
Function settings are mainly divided into two groups, function settings that can be performed by the users, and function settings that can be performed by service technicians only. The contents and operations are different between the two, so select the appropriate mode for each required setting.
1. User Function Settings
The User Function Settings are used to set various requirements for the user at the time of installing the machine and after the machine installation. The function setting is done by either a menu-selection method or by setting the numeric value. It is possible to select any function by pressing the [MENU] key, then the [ ] and [ ] keys, then [ENTER], or the numeric key for that function. For the initial value list, refer to "Chapter 12 APPENDIX". To select a menu item, you may use the [ ] and [ ] keys to highlight the required item followed by pressing the [ENTER] key, as described above, or you may directly enter the item |