Tektronix DPOPWRReference free download

File name DPOPWRReference.pdf

Getting Started with DPOPWR 3. In the Power Device tab, click Switching Loss. Now 8. The application displays results for the measurement. click Configure. You can use this side of the Quick Reference to start taking measurements with the Power Measurement and Analysis Software (DPOPWR). The other side contains a complete menu tree for DPOPWR software. NOTE. For complete operating instructions and General Safety information, refer to the online help for the application. The DPOPWR Power Measurements and Analysis software transforms a digital oscilloscope into an analysis tool that measures and analyzes power dissipation in power supply 4. Click the arrow adjacent to Sources to view the Source switching devices and magnetic components. It then Configuration Panel. 9. To generate a report, select the Report button. Select the generates detailed test reports in customizable formats. template in the Generate Report tab. Performing a Switching Loss Measurement 10. Select the Generate button to post the test data to the template. To measure Switching Loss, follow these steps: 1. Select Analyze> Power Analysis> Select in the oscilloscope menu bar. 2. Connect the probes to the device under test. The test setup for Switching Loss is as shown. 5. Select the source (Channel, Math, or Ref) and assign the Voltage and Current channels. NOTE. When connecting to a circuit with 6. Click the Deskew button if necessary. hazardous voltages, refer to the warnings for 7. Click the Single button to start running the the individual products and verify that the measurement. If the measurement is successful, the probes and other components are used within application automatically displays the results. You can their ratings. also select the Results button to view the results. For up-to-date information on Tektronix oscilloscope Recommended Accessories solutions for Power Measurement, access the Deskew Fixture - 067- - -1686- -xx www.tektronix.com/po