Tektronix TDSUSB2QuickReference free download

File name TDSUSB2QuickReference.pdf

Getting Started with TDSUSB2 The application displays results as a summary and as an eye diagram as shown below. You can use this side of the Quick Reference to start taking measurements with the USB2.0 Compliance Test Package (TDSUSB2). The other side contains a complete menu tree for TDSUSB2 software. NOTE. For complete operating instructions and General Safety information, refer to the Online Help for the application. 4. Select Measurement > Configure and set up the The package includes an application (Universal Serial Bus application in the Configure and Source tabs. measurements software) and an optional USB2.0 comprehensive compliance test fixture. The design of the package helps you to test if USB2.0 devices meet the compliance test requirements of the USB2.0 industry for physical layer measurements. The package supports these tests: Signal Quality, Inrush current test, Droop test, Chirp and Receiver sensitivity testing, Suspend, Resume, Reset from High Speed, Reset from Suspend, and Packet Parameter tests. Performing Signal Quality Test 1. Select File > Run Application > in the oscilloscope menu bar. Then select TDSUSB2.0 Test Package, App > USB2.0 Test Package, or Analyze > USB2.0 Test Package. 2. Connect the device under test (DUT) to the Device SQ 6. Select Results > Details to view the results in a statistical section of the test fixture. format. 5. Push the "Running Man" button to start taking measurements. Generating a Compliance Report To produce a compliance test report, select Utilities > Report Generator. For up-to-date information on Tektronix oscilloscope solutions for USB2.0 compliance testing, access the 3. Select Measurement > Select and choose a test for the