MAKITA DC122-TE free download

File name DC122-TE.pdf

T ECHNICAL INFORMATION New Tool For Models DC122 Description One Hour Charger CONCEPTION AND MAIN APPLICATIONS Charger for Battery122. 60.5mm(2-3/8") Charging time for Battery 122 is one hour. (For Battery 121 two hours.) 88 mm ") -3/4 (3 (5 6mm -1 14 /8" ) Specifications Charging time(hr) Output voltage(V) Output Current(A) Battery121 Battery122 DC12 1.3 2 1 Notes Even if both Battery/Charger are normal, sometimes the red light may not light. If the light does not work for more than 5 minutes after charging, it means a failure of either Battery or Charger. Stop charging in such a case, because Charger will be broken too, if you continue using broken Battery. Differentiating of Charger condition Measure the voltage between output terminals of Charger with a tester. If you connect it with the nominal voltage source and the D.C. voltage of 14.4~16.4V is output, the condition of Charger is normal. As for checking Battery, refer to the technical notice of Battery 122. Notes in replacing Inlet When connecting Lead wires with Inlet, as shown in the Figure, connect Red wire to the left side and Black wire to the right, putting the polar convex in connection cord inserting face downward . Red lead wire Black lead wire