DENON Service Bulletin OSTUS 003 free download

File name Service Bulletin OSTUS 003.PDF

100 Corporate Drive Mahwah, NJ 07430 Service Bulletin No. : OST- US 003 Date: February 26, 2007 _____________________________________________________________ Model: DCM-290, DCM390 Subject: Mechanism Alignment Procedure Symptom: A mechanical Alignment (timing) procedure is not shown in the service manual. Solution: See the following information for alignment details. ______________________________________________________________________________________ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the DENON Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by DENON for any damage, injury or loss resulting from the misuse of the information contained in this document. The DRIVE GEAR must be aligned before re-assembling the set. To align the DRIVE GEAR (ref. # 12-8), locate the hole on the outer portion of the gear and align it with the hole in the BASE (ref. # 12-6) chassis. Next, Install the MIDDLE and TRANSFER GEARS, there is no alignment required for these two gears. ______________________________________________________________________________________ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the DENON Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by DENON for any damage, injury or loss resulting from the misuse of the information contained in this document. Then, Install the DISC TRAY. Align the DISC TRAY so slot #4 is centered over the Traverse Mechanism. ______________________________________________________________________________________ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the DENON Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsib