Kyocera SB-2MH-0002-B413 free download

File name SB-2MH-0002-B413.pdf

(Page.1/1) Service Bulletin Ref. No. 2MH-0002 (B413) [Service Information] November 18, 2011 Subject Notes on Upgrade of the Firmware Model FS-1030MFP, FS-1130MFP, FS-1035MFP, FS-1135MFP Topic Please restart the machine by completely disconnecting and reconnecting the power cord after firmware was upgraded. Reason The LCD display remains lit and the power cannot be turned OFF even if the power switch was pressed after firmware upgrade. Therefore, it is necessary to disconnect and reconnect the power cord in order to turn the power OFF and ON. After the power cord was reconnected, the machine starts up and the LCD is lit. Then, the machine will automatically enter in the [Ready] mode since it retains the previous status. KMC's Classification Entire Stock Rework In-Field modification at next visit In-Field modification by case No modification necessary Field Measure: Please note the above. KYOCERA MITA Europe B.V. European Service & Development Center (ESDC)