MAKITA 61240-WW-1 free download

File name 61240-WW-1.pdf

TECHNICAL INFORMATION Subject Introduction of Kerf Block 61240 For Models LS1013 Country As a standard equipment : European countries, Algeria, Reunion As an optional accessory : All countries Description With this Kerf block, a workpiece can be cut cleanly without splinters on its rear side that contacts with Guide rule. Kerf Block workpiece Splinter-free Cut Kerf Block Kerf Board 1 How to Install: Install Kerf block complete on Guide rule with two + Screws as illustrated to the left. 2 Note: 3 This Kerf block is available for splinter-free cut in the workpiece up to 35mm in height because the height of the Kerf block is 36mm. Caution: 1) Never use the Kerf block in bevel cuts. 2) A Kerf block must always be used for cutting at ONE miter angle. 3) When cutting at another miter angle, use another Kerf block. Failure to save these three instructions will break the Kerf block into chips and cause serious personal injuries. 1. + Screw M4x12 (Part No.251314-2) 2. Kerf Block Comp. (Part No.151917-1) 3. Guide Rule Interchangeability(I/C) Item No. Current part Q'ty I/C New part Q'ty Note Kerf Block Complete A13 151917-1 1 For European countries + Screw M4x12 A14 2 For European countries 251314-2 Kerf Block Set For all countries F05 1 193051-1 (See Note below.) Note Kerf Bloc