CANON acc-145 free download

File name acc-145.pdf

Service Bulletin COPIER Issued by Canon Europa N.V. Model : Saddle Finisher-C2 No.: Acc-145 (FF-T01-W-000041-01) DATE: 09.04.99 Location : SERVICE MANUAL (FY8-13F6-000) Subject : ADDITIONAL DESCRIPTIONS Reason : This bulletin provides a new way of removing the saddle unit. Details : New Way of Removing the Saddle Unit 2. "Removing the Saddle Unit" under B. "Saddle Stitcher Assembly" on p. 4-22 The new way of removal is effective if a newly designed lattice guide (FG5-8170-040/FB3-7338-040) is installed; if an old type of lattice guide is installed, follow the instructions on p. 4-22 of the current Service Manual (FY8-13F6-000). [2] 1) Remove the four screws [1], and detach the PCB cover [2]. [1] [1] Figure 1 2) Remove the screw, and detach the bending roller knob [3]. [3] Figure 2 -1/4- Acc-145 [4] 3) Remove the four screws [5], and detach the rear lower cover [4]. [5] [5] Figure 3 4) Disconnect the two connectors [6] used to connect to the finisher assembly. [6] Figure 4 5) Remove the five screws [8], and detach the front inside cover [7]. [8] [7] Figure 5 [8]