datasheet,schematic,electronic components, service manual,repairs,tv,monitor,service menu,pcb design
Schematics 4 Free
Service manuals, schematics, documentation, programs, electronics, hobby ....


registersend pass
Bulgarian - schematics repairs service manuals SearchBrowseUploadWanted

Now downloading free:TOSHIBA KD-1009+(PFP)

TOSHIBA KD-1009+(PFP) free download

Copier office machines (laser, ink-jet,multifunctional devices)

File information:
File name:KD-1009+(PFP).pdf
[preview KD-1009+(PFP)]
Size:645 kB
Extension:pdf
Mfg:TOSHIBA
Model:KD-1009+(PFP) 🔎
Original:KD-1009+(PFP) 🔎
Descr: TOSHIBA Copiers E 16 Service manual (eng) copy KD-1009+(PFP).pdf
Group:Electronics > Office equipment > Copiers
Uploaded:13-04-2022
User:Anonymous
Multipart:No multipart

Information about the files in archive:
Decompress result:OK
Extracted files:1
File name KD-1009+(PFP).pdf

GENERAL PRECAUTIONS FOR INSTALLATION/SERVICING/ MAINTENANCE 1. When installing the Paper Feed Pedestal KD-1009 to the Copier, be sure to follow the instructions described in the "Unpacking/Set-Up Procedure for the KD-1009" booklet which comes with each unit of the KD-1009. 2. The KD-1009 should be installed by an authorized/qualified person. 3. When transporting/installing KD-1009, employ two persons and be sure to use the positions as indi- cated below. KD-1009 is fairly heavy and weight approximately 17 kg (37.5 lb), therefore pay full attention when handling it. 4. Before starting installation, servicing or maintenance work, be sure to turn off and unplug the copier first. 5. The KD-1009 is supplied with power from the copier, requiring no additional power source. 6. The KD-1009 should be grounded to the specified positions on the machine frame. 7. When servicing or maintaining the KD-1009, be careful about the rotating or operating sections such as gears, pulleys, sprockets, cams, belts, etc. 8. When parts are disassembled, reassembly is basically the reverse of disassembly unless otherwise noted in this manual or other related documents. Be careful not to reassemble small parts such as screws, washers, pins, E-rings, toothed washers to the wrong places. 9. Basically, the machine should not be operated with any parts removed or disassembled. 10. Delicate parts for preventing safety hazard problems (such as thermofuses, door switches sensors, etc. if any) should be handled/installed/adjusted correctly. 11. During servicing or maintenance work, be sure to check the nameplate and other cautionary labels (if any) to see if they are clean and firmly stuck. If not, take appropriate actions. 12. Use suitable measuring instruments and tools. 13. The PC board must be stored in an anti-electrostatic bag and handled carefully using a wristband, because the ICs on it may be damaged due to static electricity. Caution: Before using the wrist band, pull out the power cord plug of the copier and make sure that there is no uninsulated objects in the vicinity. 14. For the recovery and disposal of used KD-1009, consumable parts and packing materials, it is recom- mended that the relevant local regulations/rules should be followed.

>> View document online <<



>> Download document << eServiceInfo Context Help



Was this file useful ? Share Your thoughts with the other users.

User ratings and reviews for this file:

DateUserRatingComment

Average rating for this file: 0.00 ( from 0 votes)


Similar Service Manuals :
TOSHIBA 017-2 Wire Harness RUS eP08-16 - TOSHIBA my1015sm - TOSHIBA 1650 2050pc - TOSHIBA 2060SM - TOSHIBA 008 Printing RUS eP01-08 - TOSHIBA MG2012 - TOSHIBA 009-1 Paper Feeding System RUS eP01-P08 -
 FB -  Links -  Info / Contacts -  Forum -   Last SM download : Ricoh Aficio B202/B178/B180

script execution: 0.01 s