File name SC2006.part070.rar
Alignments, Test Procedures VAD8031 8. EN 31-1
8. Alignments, Test Procedures
8.1 Adjust Laser Control In case no defect is found during the "Short Term Test
Procedure" the test has to be extended with a burn in test -
"Long Term Test Procedure".
In case of exchanging DVD-M or PWB an adjustment to align
The burn in test described herein should be done with a
OPU and PWB to each other is necessary.
Make a recording of 1 to 2 hours on M1/HQ and M2/SP mode.
8.1.1 Adjustment Procedure