IBM Deskstar 4 Quick Installation Guide v3.0 free download

File name Deskstar 4 Quick Installation Guide v3.0.pdf

IBM storage products Quick installation guide Deskstar 4 AT/IDE Models: DCAA-32880, DCAA-33610, DCAA-34330 8. Save the drive packaging material including the Handling precautions ESD bag in the event that the drive must be returned. Place the drive in an anti-static bag before placing it 1. Do not cover the breather hole! Covering the in the shipping container. The warranty will be void if breather hole may result in loss of data. the drive is not returned in IBM approved packaging. Quick installation procedure Note: It is advisable to backup all data before proceeding with the installation. 2. Do not press on the drive! Do not apply any force If your system BIOS cannot handle large capacity to the drive during handling or installation. drives (over 540 MB), you may need to use a disk overlay program such as Ontrack's Disk Manager. The following procedure uses the Ontrack Disk Manager software. Information on obtaining a copy of Ontrack's Disk Manager can be found on the Web at www.ibm.com/harddrive. 3. Always handle the drive with care to prevent dam- age from shock, vibration, or electrostatic discharge Setting the jumpers (ESD). 1. In a one-drive system, configure your new drive as 4. Do not open the static-protective bag containing the Master (Device 0). drive until required. Static electricity can damage the 2. In a two-drive system, one drive must be drive. designated as the Master, the other as the Slave 5. Turn off & unplug your computer. Remove cover. (Device 1). 6. When installing the drive, touch a grounded, 3. When installing the new drive as a Slave, check the unpainted metal surface with the static-protective Master drive to determine if a jumper change is package contai