Kyocera DF-074 free download

File name DF-074.pdf

Service Bulletin SB Number: SB DF-074 Creation Date: 23/06/2010 Subject: Firmware upgrade (Error code after sleep mode recovery) Model: DF-780/780(B) Affected models: TASKalfa250ci/300ci/400ci/500ci/300i/420i/520i/552ci Item Contents 1 Error code C8360 Error code C8360 (Slide motor error) may occur during sleep mode recovery, when pressing the start key after a stapling job has been cancelled. 2 Paper stack Phenomenon adjustment failure Paper stack adjustment failure may occur, when stapling the A4 sized paper stack. Cause The corner of the rear edge of the paper stack may contact the inside wall of the staple unit. Solution The paper stack passing position has been relocated 4 mm to the machine rear side. Please replace the PBA-control-KM with the latest type to implement the solution. Firmware Type Program No. Check SUM Version DF-780/780B (1000) 5JA_9200.007.005 66ED 007.005 Parts No. Old Parts New Parts Description Q'TY Interchange- SP No. No. ability Old New Old New 1 305JA71604 305JA71605 PBA-CONTROL-KM 1 1 O O O 5JA71604 5JA71605 Classification Entire stock rework In-field modification at next visit X In-field modification by case No modification necessary Field measure When the above mentioned phenomena occur, please upgrade the firmware to the latest version. To improve the paper stack adjustment, please replace the PBA-control-KM with the latest type. Serial numbers of affected machines Type Serial number DF-780/780(B) Not available KMIS Service Department, Kyocera Mita Europe Page of A078 / SB DF-074