NOKIA 6rh42disass free download

File name 6rh42disass.pdf

CCS Technical Documentation RH-42 Series Transceivers Disassembly Issue 2 09/2003 Confidential Nokia Corporation RH-42 Disassembly CCS Technical Documentation Page 2 Nokia Corporation Confidential Issue 2 09/2003 RH-42 CCS Technical Documentation Disassembly Disassembling the RH-42 Basic Transceiver Remove the back cover. 1. Step 1. Push down hard on the button. Step 2. Slide the cover in the direction of the arrow. 2. Remove the battery. Step 1. Place fingers on both ends of the battery latch. Step 2. Push the latch away from the battery. The battery will bounce off. Remove the front cover. 3. Step 1. Get a firm hold on the phone around the accessory interfaces (in the D-cover). Step 2. Hold the side of the front cover as indicated by the arrow in the D-cover. Step 3. Life the side up. 4. Remove the PWB from the housing. Remove six screws. Note: The picture shows the assembly order. Assembly is in the reverse order. Issue 2 09/2003 Nokia Corporation Confidential Page 3 RH-42 Disassembly CCS Technical Documentation Disassemble C- and D-covers. 5. Step 1. Place a screwdriver with a chisel point between the C- and D-covers' snap feature. Step 2. Lift the D-cover. Note: The screwdriver must not hit the engine module's components during disassembly. 6. Step 3. Remove the system connector. The system connector assembly should stay on the engine when the D-cover is moved. It can be removed manually. Note: The use of gloves is mandatory while removing the system connector, in order to prevent fingerpri