|Information about the files in archive:|
|File name||Text |
|9xx_disassembly.pdf||DeskJet 9xx Disassembly Procedures
TABLE OF CONTENTS CASE PARTS ...1 BUSINESS TRAY FRAME ASSEMBLY ...4 INPUT TRAY ...5 PAPER MOTOR ...7 CABLE HARNESS ...9 WING FRAMES AND PAPER PUSHER ...10 POWER SUPPLY ...11 MAIN PCA ...13 BEAD FERRITE ...|
|9xx_exploded.pdf||DeskJet 9xx Exploded Views
DeskJet 9xx Printer
Carriage Parts & Cables
In Tray Parts
Interconnect PCA Paper Path Parts Service Station Parts
Case Parts & IO Parts
Customer Replaceable Parts / Accessories
Hagaki Card Loader
Case Parts / IO
Nameplate Cover Connector Assy-Keypad
Case-Top Case-Lower Right Assy-IR (96x,99x)
Business Tray Frame Assembly Extension-Output
Assy-Input Drawer, Business Tray
Carriage Parts & Cabling
Carriage Motor Cable-Flex,Head-Drive
Belt-Carriage Spring Rod Assy-Opto Sensor Assy-Cable, Faruq Sensor Rod-Carriage Encoder Strip Assy-Turnaround Spring-Belt Tension
Paper Path Parts
ROLLER-REAR ASSY-BRACKET, PAPER MOTOR LOWER PAP|
|9xx_tr_maint.pdf||DeskJet 9xx Maintenance and Troubleshooting
Backbone: Use water on a clean lint-free cloth. Dry carefully, parts left damp may rust.
Carriage rod: Cleaning is not recommended. If extremely dirty, wipe with a clean lint-free cloth. Use no water or solvents. Encoder strip: Wipe left to right (viewed from front) with a clean lint-free cloth. Do not pull hard on the strip. Drive roller: Use water on a clean lint-free cloth. Do not use solvents.
Pivot assembly: Use water on a clean lint-free cloth. Dry carefully.
Print cartridge contacts: Use water on a lint-free cloth.
Case Parts: Use mild detergents such as PK 200 or Simple Green with water on a clean lint-free cloth. Solvents and water on a clean lint-free cloth can be used to remove stubborn fingerprints, etc., on external case parts. Paper dust: It is recommended that vacuuming be used to remove paper dust from inside the printer, not compressed air. 6429921C
Do not clean the following: Pinch rollers, drive be|
|dj9xxchk.pdf||For all 9xx printers
Check the Print Cartridges
Verify that the rear access cleanout or 2 sided printing module is installed Plug in the printer. Turn on the printer. Open the access door and the carriage will move to the center. Verify the print cartridges are installed. Verify the print cartridges are OK by noting the icon they point to. If a problem is indicated, verify that the correct print cartridges are installed. If a problem is indicated, verify that all tape has been removed from the print cartridges.
Access Door Encoder Strip 2 Sided Printing Module Print cartridges OK Black print cartridge low on ink Color print cartridge low on ink Problem with black print cartridge Problem with color print cartridge Print Cartridge Light Resume Light Power Light
Rear Access Cleanout Assemby
Output Tray Input Tray
Power Button Resume Button Cancel Button Length Adjuster Width Adjuster
Check the Printer
Pull out the input tray and remove any paper. Remove the rear access cleanout or |