NOKIA 05-npm6 6x-dis free download

File name 05-npm6_6x-dis.pdf

Customer Care Solutions NPM-6/6X Series Transceivers Disassembly and Assembly Instructions Issue 2 06/03 CopyrightNokia. All rights reserved NPM-6/6X Disassembly and Assembly Instructions CCS Technical Documentation Disassembling instructions ... 4 Exchange of system connector... 6 Exchange of battery connector... 8 Page 2 Copyright Nokia. All rights reserved Issue 2 06/03 NPM-6/6X CCS Technical Documentation Disassembly and Assembly Instructions Disassembling instructions Note! It is only allowed to reassemble C-Cover (phone) once. For second reassem- bling use of new C-Cover is mandatory! Use new screws in general. Press the grip markings on both sides of the B-Shell and To remove the A-Shell press Locking Springs as shown and remove B-Shell. pull A-Shell from the unit. 3 1 5 4 6 2 Tightening torques for screws (Note! Two tightening Remove engine from C-Cover. torques!): -screws 1-4, use 40 Ncm -screws 5-6, use 25 Ncm. Tightening order for screws is from 1 to 6. When tightening the screws 5 and 6 it is necessary to press strongly the system connector against C-cover to avoid sealing tape twisting in the system connector. If the sealing tape twists with screwassembly it is not waterproof anymore. Note! The screws can be assembled only once. Separate the UI-Module from Radio Module carefully, Use tweezers to remove Vibra Motor. because of the board-to board-connector. Issue 2 06/03 CopyrightNokia. All rights reserved Page 3 NPM-6/6X Disassembly and Assembly Instructions CCS Technical Documentation Remove Earpiece. Note the guiding pin when assembling. Remove Keymat. Page 4 Copyright Nokia. All rights reserved Issue 2 06/03 NPM-6/6X CCS Technical Documentation Disassembly and Assembly Instructions Exchange of system connector The System Connector is attached with double-sided Press SRT-6 between C-Cover and System Connector and adhesiv