File name SB-2J0-0030-B442.pdf
Service Bulletin Ref. No.2J0-0030 (B442)
December 17, 2011
Measures against the A5 Size Paper Crease When the MP Tray
is in Use
Model FS-2020D, FS-3920DN, FS-4020DN
Paper crease might appear when A5 size paper of a certain brand was fed from the MP tray.
The GUIDE TURN position was modified in order to keep the paper feed balance when feeding from the MP tray.
Due to this change, the shape of the COVER MPF was changed since the COVER MPF (No.1) might interfere with
*Please perform the following procedures and replace the COVER MPF (No.1) to handle the machines in the field.
1. Remove the TOP COVER.
2. Remove the LEFT COVER.
3. Remove the cassette.
4. Remove the MP tray and then replace the COVER MPF (No.1).
5. Remove the SHEET GUIDE (disused).
6. Loosen the screw (x2) for the GUIDE TURN.
7. Push down the center of the GUIDE TURN and tighten the screw (x2).
8. Assemble in the reverse order of disassembly.
Press down GUIDE GUIDE TURN
TURN and fix it.
SHEET GUIDE disused COVER MPF (No.1)
Old Part New Part Q'ty bi lity
No. No. No. Description Remarks
Old New Old New
1 COVER MPF 1 1 O O
KMC's Classification Entire Stock Rework In-Field modification at next visit
In-Field modification by case No modification necessary
Please align sheets to the paper guide when feeding from the MP tray. This can prevent skew feeding and
Serial Nos. of the Affected Machines: After using up the old stock
KYOCERA MITA Europe B.V.
European Service & Development Center (ESDC)