DENON Service Bulletin OST-F1542 free download

File name Service Bulletin OST-F1542.PDF

100 Corporate Drive Mahwah, NJ 07430 Service Bulletin No. : OST-F1542 Date: July 28, 2009 _____________________________________________________________ Model: AVR-2310CI Subject: Supply of Setup Tool Symptom: Since the AVR-2310CI is not equipped with the Ethernet terminal, it cannot be set up externally by means of a PC using the web. Solution: We will supply the Setup Tool and the Instruction Manual to be used for performing various setup for the subject models by means of a PC via the RS-232C. This Software has been designed so that the AV Amplifier can easily be set up via the PC's Display by connecting the AV Amplifier to the PC by means of RS-232C Cable available in the market. Note: Please pay attention upon handling since this Tool has been designed on the assumption that an installer has special knowledge and can operate it. It is not general user operable tool and should not be given to the end user! 1) Program File to be used to install the "AVR-2310CI/2310 Setup Tool" onto a PC: For Windows Vista: AVR2310_SystemSetup_0.0.14(for_Windows_Vista).exe For Windows XP: AVR2310_SystemSetup_0.0.14(for_Windows_XP).exe When this Program File is executed on a PC, the above "AVR-2310CI/2310 Setup Tool" can be automatically installed on the PC. 2) Operating Manual for the "AVR-2310CI/2310 Setup Tool" : AVR2310 setup tool(0.0.14) manual.pdf ______________________________________________________________________________________ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the DENON Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by DENON for any damage, injury or loss resulting from the misuse of the information contained in this document. 3) Update the firmware of unit on the "AVR-2310CI/2310 Setup Tool". Refer to the Operating Manual for Setup Tool. AVR2310 setup tool(0.0.14) manual.pdf Confirmation of the Version after updating: After completion of the updating operation, the new version number can be confirmed by starting up the AVR- 2310CI according to the following procedure. With the following operation, the AVR-2310CI can be set to the Flash-ROM Version-Number Confirmation Mode. Turn the power of the AVR-2310CI on, while holding both "STATUS" button and "DIMMER" button on the front panel simultaneously. Every time the "STATUS" Button is pressed, version numbers of the MAIN, SUB, etc. are indicated on the front panel section in the