JVC GR-DVL155EG free download

File name 86662.pdf

SERVICE MANUAL DIGITAL VIDEO CAMERA GR-DVL155EG,DVL160EG/EK, DVL167EG/EK GR-DVL155EG,DVL160EG/EK,DVL167EG/EK No. 86662 SPECIFICATIONS (The specifications shown pertain specifically to the model GR-DVL155) Camcorder General Power supply : DC 11.0 V DC 7.2 V (Using AC Adapter) (Using battery pack) S-Video Output AV Video output Audio output DV Output PC JLIP Connectors : Y:1 V (p-p), 75 , analogue C:0.29 V (p-p), 75 , analogue : 1 V (p-p), 75 , analogue : 300 mV (rms), 1 k, analogue, stereo : 4-pin, IEEE 1394 compliant : ш2.5 mm, 3-pole : ш3.5 mm, 4-pole Power consumption LCD monitor off, viewfinder on : Approx. 4.3 W LCD monitor on, viewfinder off : Approx. 5.3 W Dimensions (W x H x D) : 79 mm x 89 mm x 167 mm (with the LCD monitor closed and the viewfinder pushed down) Weight : Approx. 550 g Operating temperature : 0°C to 40°C Operating humidity : 35% to 80% Storage temperature : ­20°C to 50°C Pickup : 1/4" CCD Lens : F 1.8, f = 3.6 mm to 36 mm, 10:1 power zoom lens Filter diameter : ш37 mm LCD monitor : 2.5" diagonally measured, LCD panel/TFT active matrix system Viewfinder : Electronic viewfinder with 0.24" black/white LCD Speaker : Monaural AC Adapter Power requirement Output : AC 110 V to 240 V`, 50 Hz/60 Hz : DC 11 V ,1A Specifications shown are for SP mode unless otherwise indicated. E & O.E. Design and specifications subject to change without notice. Digital Video Camera Format : DV format (SD mode) Signal format : PAL standard Recording/Playback format : Video: Digital component recording : Audio: PCM digital recording, 32 kHz 4-channel (12-bit), 48 kHz 2-channel (16-bit) Cassette : Mini DV cassette Tape speed : SP: 18.8 mm/s LP: 12.5 mm/s Maximum recording time : SP: 80 min. (using 80 min. cassette) LP: 120 min. VICTOR COMPANY OF JAPAN, LIMITED VIDEO DIVISION S40894 Printed in Japan This service manual is printed on 100% recycled paper. COPYRIGHT © 2002 VICTOR COMPANY OF JAPAN, LTD. No. 86662 January 2002 TABLE OF CONTENTS Section Title Page Section Title Page Important Safety Precautions INSTRUCTIONS 1. DISASSEMBLY 1.1 BEFORE ASSEMBLY AND DISASSEMBLY ... 1-1 1.1.1 Precautions ... 1-1 1.1.2 Assembly and disassembly ... 1-1 1.1.3 Destination of connectors ... 1-1 1.1.4 Disconnection of Connectors (Wires) ... 1-1 1.2 JIGS AND TOOLS REQUIRED FOR DISASSEMBLY, ASSEMBLY AND ADJUSTMENT ... 1-2 1.2.1 Tools required for adjustments ... 1-2 1.3 DISASSEMBLY/ASSEMBLY OF CABINET PARTS AND BOARD ASSEMBLY ... 1-2 1.3.1 Disassembly flow chart ... 1-2 1.3.2 Disassembly method ... 1-3 1.4 4 MONITOR ASSEMBLY ...