File name Alpine-INAN333RS_RRS gps+car rec.pdfSERVICE MANUAL
GPS Car Navigation / CD Receiver
- Confidential "Schematic Diagram (ECU P.W.Board / ASSY,FPC SHEET SW) cannot use a reference function"
INA-N333RS
(INA-N333RS)
TO ALPINE Home Page
3 /04-A 68E36308S01
INA-N333RS/ INA-N333RRS
The following cautions will prevent accidents in the workplace and will ensure safe products. *The symbols indicate caution is needed to prevent injuries and damage to property. The symbols and their meanings follow. If you ignore this symbol and handle the product incorrectly or unsafely, serious injury or death may result. If you ignore this symbol and handle the product incorrectly or unsafely, injury or only material damage may result.
Warning Caution
*The following symbols indicate two levels of cautions. When you see this symbol, you have to be very careful.
When you see this symbol, you have to follow the instructions there.
Warning
Do not look squarely into the laser light coming from the pickup.
You may loose you sight.
Fuse Caution
Always use a designated fuse. Use of an incorrect fuse may result in a fire.
Caution
Do not allow wiring to be caught in the screw/chassis.
If wiring is caught in the screw/chassis, it may cause a short circuit, resulting in a fire.
Battery Caution
Use the designated battery. Confirm the correct polarity and seat of the battery. An incorrect battery or an improperly connected or seated battery may result in a fire.
High Temperature Caution
Touching the heat sink may cause severe burns.
Designated Parts Caution
Look up the part list and ensure that only designated parts are used to prevent problems or accidents.
Reverse Power Supply Connections or Misconnections Caution
Reverse power supply connections or misconnections may cause ignition problems and smoke may result.
Wiring Caution
Ensure that the wiring is correct when rewiring to prevent problems with ignition/breakdown.
Soldering Caution
Hot solder from solder splash may cause severe burns.
Wear Gloves
Wear gloves to prevent electrical shocks or injury from the end face of the metal.
For the FDA laser standard, the following CAUTION label is stuck on each product.
Please be careful for repair.
CAUTION-Laser radiation when open, DO NOT STARE INTO BEAM
-2-
INA-N333RS/INA-N333RRS
Contents Packing Assembly Parts List Packing Method View System Connection Specifications I/O Interface Extension Cable Adjustment Procedures Block Diagram Parts Layout on P.W.Boards and Wiring Diagram Schematic Diagram Terminal Voltage of IC/ TR Description of IC Terminal Exploded View (Cabinet) Exploded View (DVD Deck Mechanism) (DV33M01B)
4 4 5 to 7 8,9 10 to 16 17 18 , 19 20, 21 22 to 26 27 to 40 41 to 48 49 to 55 56 , 57 58
NOTE : Due to continuing product improvement, specifications and designs are subject to change without notice.
-3-
INA-N333RS/INA-N333RRS
Packing Assembly Parts List
Symbol No. 101-1 101-2 101-3 101-4 102 103 104 105 106 03S60820Y16 03S60824Y01 36A11113W01 03A608 | 