Sanyo STK402-240 free download

File name STK402-240.PDF

Ordering number : ENN7070 Thick-Film Hybrid IC STK402-240 Three-Channel Class AB Audio Power Amplifier IC 25 W + 25 W + 25 W Overview The STK402-200 series products are audio power amplifier hybrid ICs that consist of optimally-designed discrete component power amplifier circuits that have been miniaturized using SANYO's unique insulated metal substrate technology (IMST). SANYO has adopted a new low thermal resistance substrate in these products to reduce the package size by about 60% as compared to the earlier SANYO STK408-000 series. Package Dimensions unit: mm 4191-SIP19 [STK402-240] Features · Series of pin compatible power amplifiers ranging from 20 W Ч 3 channels to 60 W Ч 3 channels (10%/1 kHz) devices. The same printed circuit board can be used depending on the output power grade. · The pin arrangement is compatible with that of the 2channel STK402-000 series. This means that 3-channel printed circuit boards can also be used for 2-channel products. · Miniature packages -- 15 W/ch to 40 W/ch (THD = 0.4%, f = 20 Hz to 20 kHz); 59.2 mm Ч 31.0 mm Ч 8.5 mm * *: Not including the pins. · Achieves superlative heat dissipation due to the adoption of SANYO's Insulated Metal Substrate Technology (IMST). · Output load impedance: RL = 6 · Allowable load shorted time: 0.3 seconds · Supports the use of standby, muting, and load shorting protection circuits. SANYO: SIP19 Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN N1102AS (OT) No. 7070-1/4 STK402-240 Series Organization These products are organized as a series based on their output capacity. Item Output 1 (10%/1 kHz) Output 2 (0.4%/20 Hz to 20 kHz) Maximum supply voltage (No signal) Maximum supply voltage (6 ) Recommended supply voltage (6 ) Package Type No. STK402-220 20 W + 20 W + 20 W 15 W + 15 W + 15 W ±30 V ±28 V ±19 V STK402-230 30 W + 30 W + 30 W 20 W + 20 W + 20 W ±34 V ±32 V ±22 V STK402-240 40 W + 40 W + 40 W 25 W + 25 W + 25 W ±38 V ±36 V ±25 V 59.2 mm Ч 31.0 mm Ч 8.5 mm STK402-250 45 W +45 W +45 W 30 W + 30 W + 30 W ±40 V ±38 V ±26.5 V STK402-270 60 W + 60 W + 60 W 40 W + 40 W + 40 W ±50 V ±44 V ±30 V Specifications Maximum Ratings