Gold EM6000 free download

File name Gold EM6000 alias Maplin N56FU multimeter.pdf

TRUE RMS DIGITAL MULTIMETER OWNERS MANUAL http://www.all-sun.com Read this owners manual thoroughly before use 6000 WARRANTY This instrument is warranted to be free from defects in material and workmanship for a period of one year. Any instrument found defective within one year from the delivery date and returned to the factory with transportation charges prepaid, will be repaired, adjusted, or replaced at no charge to the original purchaser. This warranty does not cover expandable items such as batteries or fuses. If the defect has been caused by a misuse or abnormal operating conditions, the repair will be billed at a nominal cost. GENERAL DESCRIPTION This multimeter is compact 3 5/6-digit true rms digital multimeter with the USB2.0 standard interface. It can be used for measuring DC voltage, DC current, true-rms AC voltage, true-rms AC current, resistance, capacitance, frequency, diode, transistor, temperature, continuity and duty cycle. It has the functions of polarity indication, data hold, backlight, overrange indication, low battery indication, relative value measurement, max/min value measurement and automatic power-off. It can be operated easily and is an ideal measurement tool. 1 FEATURES 1. Measures the true-rms values of ac voltage and ac current. 2. Transfers the measurement readings of the meter to a computer through standard USB port. 3. Provides analog bar graph, reading unit indication and backlight. 4. The sampling rate is 3 times/sec. The bar graph updates at 30 times/sec. 5. Provides automatic polarity indication, manual range mode and autorange mode. 6. Provides low battery indication, automatic power-off, manual power-off, relative value measurement, and max/min value measurement. 7. Measures DC/AC voltage, DC/AC current, resistance, capacitance, frequency, diode, transistor, temperature (*/*), continuity and duty cycle. 8. Provides overload protection for all ranges. 9. Low power consumption. 2 SAFETY INFORMATION This meter has been designed according to IEC-61010 concerning electronic measuring instruments with a measurement category (CAT III 600 V) and pollution degree 2. Warning To avoid possible electric shock or personal injury, follow these guidelines: a. Do not use the meter if it is damaged. Before you use the meter, inspect the case. Pay particular attention to the insulation surrounding the connectors. Inspect the test leads for damaged insulation or exposed metal. Check the test leads for continuity. Replace damaged test leads before you use the meter. Do not use the meter if it operates abnormally. Protection may be impaired. When in doubt, have the meter serviced. Do not operate the meter around explosive gas, vapor, or dust. Do not apply more than the rated voltage, as marked on the meter, between terminals or between any terminal and earth ground. Before use, verify the meter's operation by measuring a known voltage. When measuring current, turn off circuit power before 3 b. c. d. e. f. g. h. i.