File information: | |
File name: | sony_ke-p42m1.rar [preview sony_ke-p42m1] |
Size: | 4148 kB |
Extension: | |
Mfg: | |
Model: | sony_ke-p42m1 🔎 |
Original: | |
Descr: | service manual sony_ke-p42m1 |
Group: | Electronics > Consumer electronics > TV |
Uploaded: | 31-05-2015 |
User: | sasajovo |
Multipart: | No multipart |
Information about the files in archive: | ||
Decompress result: | OK | |
Extracted files: | 1 | |
File name sony_ke-p42m1.pdf KE-P42M1 SERVICE MANUAL AEP Model SPECIFICATIONS Display Unit: Power Requirement: 220240 V AC, 50 Hz Screen Size: 42 inches Approx. 107.4 cm measured diagonally Display Resolution: 852 dots (horizontal) × 480 lines (vertical) Power Consumption: 365 W Standby Power Consumption: 0.6 W or less Dimensions (w × h × d): Approx. 1,075 826 312 mm (with stand) Approx. 1,075 × 750 × 110 mm (without stand) Weight: Approx. 45 kg (with stand) Approx. 39.5 kg (without stand) TV System: Depending on your country/region selection: B/G/H, D/K, L, I Colour System: PAL, SECAM NTSC 3.58, 4.43 (only Video In) Aerial: 75 ohm external terminal for VHF/UHF Channel Coverage: VHF: UHF: CATV: HYPER: D/K: L: I: E2E12 E21E69 S1S20 S21S41 R1R12, R21R69 F2F10, BQ, F21F69 UHF B21B69 Panel System: Plasma Display Panel PDP Colour TV Terminals: / 1 21-pin Scart connector (CENELEC standard) including audio/video input, RGB input, and TV audio/video output. / 2 21-pin Scart connector (CENELEC standard) including audio/video input, RGB input, and audio/video output. / S 3 (SMARTLINK) 21-pin Scart connector (CENELEC standard) including audio/video input, S video input, selectable audio/video output, and SmartLink interface. 4 Y: 1 Vp-p, 75 ohms, 0.3V negative sync PB: 0.7 Vp-p, 75 ohms PR: 0.7 Vp-p, 75 ohms 4 Audio input (phono jacks) 500 mVrms Impedance: 47 kilo ohms S 5 S video input (4-pin mini DIN) 5 Video input (phono jack) 5 Audio input (phono jacks) Audio output (Left/Right) (phono jacks) i Headphones jack 5 CENTRE SPEAKER IN: Max. 180 W (6-ohms) Sound Output: 10.0 W + 10.0 W Accessories Supplied: · Remote control RM-Y1002 (1) · Size AA batteries (R6 type) (2) · Coaxial cable (1) · Mains lead (Type C-6) (1) · Mains lead (Type BF) (1) Mains lead Type BF may not be supplied depending on the country. · Cleaning cloth (1) · Clamp screws (2) · Plug holder (1) Optional Accessory: · Wall-Mount Bracket SU-PW2 · TV STAND SV-PG3 Other Features: · Teletext, Fastext · Sleep Timer · SmartLink (Direct link between your TV and a compatible VCR or DVD recorder. For more information on SmartLink, please refer to the instruction manual of your VCR or DVD recorder.) · TV system autodetection · Auto Format · Screen Memo · NexTView (depending on availability of service) · Picture Off KE-P42M1 (AEP) 2 SAFETY CHECK-OUT After correcting the original service problem, perform the following safety checks before releasing the set to the customer: 1. Check the area of your repair for unsoldered or poorly-soldered connections. Check the entire board surface for solder splashes and bridges. 2. Check the interboard wiring to ensure that no wires are "pinched" or contact high-wattage resistors. 3. Check that all control knobs, shields, covers, ground straps, and mounting hardware have been replaced. Be absolutely certain that you have replaced all the insulators. 4. Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair. Poi |
Date | User | Rating | Comment |