| FLUKE 123 Remote Control & Programming.pdf | | REMOTE CONTROL AND PROGRAMMING REFERENCE
for the FLUKE 123
Industrial ScopeMeter
=============================================================
This file contains remote control and programming information
for the above-mentioned model with use of the PM9080/001
Optically Isolated RS232 Adapter/Cable.
It consists of the following chapters:
1. INSTALLING THE PM9080/001
2. INTRODUCTION TO PROGRAMMING
3. COMMAND REFERENCE
APPENDIXES
APPENDIX A ACKNOWLEDGE DATA
APPENDIX B STATUS DATA
APPENDIX C WAVEFORM DATA
APPENDIX D ASCII 7-BIT CODES
Page 1.1
=============================================================
1. INSTALLATION OF THE PM9080/001
- Connect the PM9080/001 to the RS232 port of the computer
as indicated in the PM9080/001 Instruction Manual.
If necessary, use the 9-pin to 25-pin adapter and the
25-pin gender changer included |
