EmbeddedArtists LPCXpresso Base Board revB1 free download

File name LPCXpresso_Base_Board_revB1.pdf

Page 2 LPCXpresso connector and Reset Page 3 Expansion connectors Page 4 Optional LPC1xxx and JTAG connectors Page 5 USB, CAN, ETH, RS422/485 interfaces Page 6 Direct digital I/O peripherals Page 7 Analog peripherals Rev B1 Page 8 Changed to generic pin naming since many different LPCXpresso target boards exist. I2C peripherals Rev B Added J60/J61/R216/R217 (page 5) for USB Host i/f. Page 9 Added J62 (page 6) to support LPC17xx bootload. Added J58 (page 10) to support spi i/f to OLED or mbed. SPI peripherals Rev A First rev Page 10 Shared SPI/I2C peripherals UL = UnLoaded = normally not mounted component. Page 11 Default jumper settings are indicated in the schematic. USB-to-UART bridge, RF-module, power supply However, always check jumper positions on actual boards since there is no guarantee that all jumpers are in default place. +3V3 Reset generation C1 100nF