Agilent HP 86100 A 252C B Series Module Installation free download

File name HP 86100 A_252C B Series Module Installation.pdf

Agilent 86100A/B Series Plug-in Modules Installation Guide Installation Guide Installation Instructions Installation Instructions This plug-in module is designed for use with the Infiniium DCA Agilent 86100A/B wide-bandwidth oscilloscope. To install the module into the Infiniium DCA 1 Slide the module into an available front-panel slot. You can remove or install a module while the instrument is in operation. 2 Finger tighten the two knurled screws on the module's front panel. Up to two modules can be inserted into the Infiniium DCA. All documentation (including specifications) for this plug-in module is located in the Infiniium DCA built-in information system (online help). To access the online help, touch or click Contents on the Help menu. 2 Installation Guide Installation Instructions Using an Agilent 86100A The following modules require that firmware revision A.03.04 or later be installed in the Agilent 86100A/B: 83494A, Option 103 and Option 107 86102A 86103B 86105B 86107A 86111A 86111U 86113A 86115B 86116A 86116B 86117A 86117B 86118A The firmware upgrade is enclosed in the module shipping container. Agilent recommends that you use the latest version of firmware. To learn more about firmware upgrades, available modules, or the Infiniium DCA, please visit our website at http://www.agilent.com/comms/dca. 3 Installation Guide General Safety Considerations General Safety Considerations This product has been designed and tested in accordance with IEC Publica- tion 1010, Safety Requirements for Electronic Measuring Apparatus, and has been supplied in a safe condition. The instruction documentation contains information and warnings which must be followed by the user to ensure safe operation and to maintain the product in a safe condition. Install the plug-in module according to the enclosure protection provided. This instrument does not protect against the ingress of water. This instrument protects against finger access to hazardous parts within the enclosure. WARNING If this product is not used as specified, the protection provided by the equipment could be impaired. This product must be used in a normal condition (in which all means for protection are intact) only. WARNING No operator serviceable parts inside. Refer servicing to qualified service personnel. To prevent electrical shock do not remove covers. WARNING To prevent electrical shock, disconnect the instrument from mains before cleaning. Use a dry cloth or one slightly dampened with water to clean the external case parts. Do not atte