2000-852C01_release_notes.pdf | | Keithley Instruments
KE2000 IVI Instrument Driver 2000-852C01
Release Note for Version C01
IVI Instrument Driver for the Model 2000
2/1/2013
IMPORTANT: To work properly with the driver, your instrument must have a
compatible version of firmware. Refer to section 2 (System Requirements) below
for specific details regarding the required firmware version for your instrument.
Visit www.keithley.com/support for upgrade instructions if your instrument's
firmware is not a compatible version. The instrument's firmware version is shown
on the display when the instrument is first powered up, immediately to the right of
the model number.
This document provides additional information for the installation and use of the
KE2000 IVI Instrument Driver for LabVIEW and LabWindows/CVI, Visual Basic,
and C/C++.
Table of Contents
----------------------------------------------
1 Introduction... 2
|