Panasonic TH-42PW3 free download

File name PANASONIC TH-42PW3.pdf

Service Manual TOP NEXT ORDER NO. ITD0008011C0 D10 Wide Plasma Display l TH-42PW3/TH-42PWD3 GP3D Chassis Specifications Power Source: AC 230V 50/60Hz (A B and E version) AC110V 50/60Hz (U version) Power Consumption: 295 W 2.3W (stand-by condition) 1.4W (Main off condition) Terminal: AV Video Input/ Output (BNC) 1.0 Vp-p (75ohm) NTSC PAL PAL-60 SECAM M-NTSC S-Video input (Mini Din 4 pin) Y 1.0 Vp-p (75ohm) C 0.286 Vp-p (75ohm) Audio Component/RGB In (RCA type) Y/G 1.0 Vp-p (including Sync.) PB/B PR/R HD VD PC VGA SVGA XGA SXGA UXGS(Compatible) (High-density D-sub 15 pin) Audio (3.0 mm ) 0.5 Vrms Speakers External speakers Impedance 6 ohm rated input 8 W or more recommended. SERIAL TUNER Display : No. of Pixels No. of Dots Dimensions: Display unit Height Width Depth Weight (Mass) 610 mm 1020 m m 89 mm RS-232C compatible (D-Sub 9PIN) Optional (High-density D-Sub 26PIN) Type 42 inch (106 cm diagonal 16:9)+ RC (W853 x H480) (W 2559 x H 480) ±0.35 Vp-p ±0.35 Vp-p 1.0 - 5.0 Vp-p 1.0 - 5.0 Vp-p 0.5 Vrms (RCA type) 29.5kg net (main unit only) 33.7kg (with speakers) SCHEMA*99 8 Adjustment Procedure TOP PREVIOUS NEXT 8.1 + B Set-up 8.1.1 Item / Preparation 8.1.2 Adjustments 8.2 Driver Set-up 8.2.1 Item / Preparation 8.2.2 Adjustments 8.3 Initialization Pulse Adjust 8.4 P.C.B. (Printed Circuit Board) exchange 8.4.1 Caution 8.4.2 Quick adjustment after P.C.B. exchange 8.5 Adjustment Volume Location 8.6 Test Point Location TOP PREVIOUS NEXT SCHEMA*99 8.1 + B Set-up TOP PREVIOUS NEXT 8.1.1 Item / Preparation 8.1.2 Adjustments TOP PREVIOUS NEXT SCHEMA*99 8.1.1 Item/ Preparation TOP PREVIOUS NEXT 1. Input a Grey scale signal. 2. Set the picture controls: Picture mode: Normal White balance: Normal TOP PREVIOUS NEXT SCHEMA*99 8.1.2 Adjustments TOP PREVIOUS NEXT Adjust and confirm indicated test point for the specified voltage. Adjust Name Volume Vsus Vda R605 R590 Voltage 170V ± 1V Test Point Remarks P11 pin 2 67V ± 0.5V P12 pin 1 Confirm Name 15V 15V 12V Voltage Test Point Remarks 15.4V ± 0.5V P23 pin 1 15.2V ± 0.5V P7 pin 1 11.8V ± 0.5V P25 pin 1 Audio 12V 12.5V ± 0.8V P5 pin 7 5V STB 5V Fan 15V Fan 5V PFC 5.1V ± 0.3V 5.0V ± 0.3V P25 pin 5 P27 pin 4 15.4V ± 0.5V P10 pin 1 5.1V ± 0.3V 380V ± 15V P10 pin 4 C468(+), C468(-) TOP PREVIOUS NEXT SCHEMA*99 8.2 Driver Set-up TOP PREVIOUS NEXT 8.2.1 Item / Preparation 8.2.2 Adjustments TOP PREVIOUS NEXT SCHEMA*99 8.2.1 Item/ Preparation TOP PREVIOUS NEXT 1. Input an APL 100 % white signal. 2. Set the picture controls: Picture mode: Normal White balance: Cool Aspect: 16:9 TOP PREVIOUS NEXT SCHEMA*99 8.2.2 Adjustments TOP PREVIOUS NEXT Adjust driver section voltages referring the panel data on the panel data label. Name Vsus Vbk Ve Vset Vad Vscn Vda Test Point TPVSUS (SS) TPVBK (SC) TPVE (SS) Voltage 170V ± 1V 155V ± 5V 158V ± 1V Volume R605 (P) R6443 (SC) R6774 (SS) --R6477 (SC) Remarks TPVSET (SC) 218V ± 6V TPVAD (SC) -90V ± 1V TPVSCN (SC) Vad*+118V ± 2V --TPVDA (SS) 67V ± 1V R590 (P) *See the Pa