Samsung Troubleshooting free download

File name Troubleshooting.pdf

4. TROUBLESHOOTING 4-1. ERROR MODES This is a washer integrated error mode. For detailed information, refer to the general repair scripts. For USA Error Type Causes Remarks LED LCD - The part of the hose where the water level sensor is located is damaged (punctured). - The hose is clogged with foreign material. - The hose is folded. Water Level - Too much lubricant has been applied to the insertion LE Sensor part of the air hose. - Hose engagement error (disengaged) - Part fault (Faulty internal soldering) - The water level sensor terminal is disengaged. - Main PBA fault. - The PBA connector terminal is not connected. - The motor spin net is not engaged. This error - The motor's internal coil is damaged (short-circuited occurs because 3E or cut) of restrained - The hall sensor terminal is not connected. revolutions - Foreign material (a screw) has entered the motor. - Motor overloaded due to too much laundry (Non- This error sensing) occurs when an Motor Driving - The motor hall sensor terminal is not connected. interference is E3 Error and Hall - PBA fault generated due Sensor Error - The motor driving error from the PBA is weak. to too much : Unstable relay operation, etc. laundry, etc. - This occurs due to erroneous operating signals from the motor hall sensor. - The IPM terminal of the main PBA is not connected.