Dell V710-740 free download

File name V710-740.PDF

Dell Latitude V710/V740 Service Manual DellTM LatitudeTM V710/V740 Service Manual Before You Begin Preparing to Work Inside the Computer Recommended Tools Computer Orientation Screw Identification System Components Back-Panel Fan (V740 Only) Hard Drive Memory Module, Modem, Optical Drive, and Floppy Drive Memory Module Modem Optical Drive Floppy Drive Keyboard Display Assembly and Display Latch Display Assembly Display Latch EMI Shield, Video Board, and Palm Rest EMI Shield Video Board Palm Rest Microprocessor Thermal-Cooling Assembly Microprocessor Module Flashing the BIOS Speakers System Board Base Plastics Battery Latch Assembly Pin Assignments for I/O Connectors USB Connector PS/2 Connector Video Connector file:///F|/Service%20Manuals/Dell/Latitude/v710-740/index.htm (1 of 2) [2/28/2004 8:22:01 AM] Dell Latitude V710/V740 Service Manual Parallel Connector Notes, Notices, and Cautions NOTE: A NOTE indicates important information that helps you make better use of your computer. NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death. Trademarks used in this text: Dell, the DELL logo, and Latitude are trademarks of Dell Computer Corporation; Intel is a registered trademarks of Intel Corporation; Microsoft and Windows are registered trademarks of Microsoft Corporation. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Computer Corporation disclaims any proprietary interest in trademarks and trade names other than its own. April 2002 Rev. A01 file:///F|/Service%20Manuals/Dell/Latitude/v710-740/index.htm (2 of 2) [2/28/2004 8:22:01 AM] Before You Begin: Dell Latitude V710/V740 Service Manual Back to Contents Page Before You Begin DellTM LatitudeTM V710/V740 Service Manual Preparing to Work Inside the Computer Recommended Tools Computer Orientation Screw Identification Preparing to Work Inside the Computer CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow applicable instructions in "Safety and EMC Instructions: Portable Computers" in the LatitudeTM System Information Guide that came with the computer. NOTICE: To avoid damaging the computer, perform the following steps before you begin working inside the computer. 1. Ensure that the work surface is flat and clean to prevent scratching the computer cover. 2. Save any work in progress and exit all open programs. 3. Turn off the computer and all attached devices. NOTE: Ensure that the computer i