File name Troubleshooting.pdf
4-1. LED Indications
Item TEMP LAMP Standby
Red Blue Blue
No. TEMP LAMP STANDBY Description
about 30 seconds.
2 The projector is operating normally.
your remote control or projector to turn it on.
normally. See Action 1 below.
6 The lamp cover covering the lamp is not closed correctly. See Action 2 below.
The temperature inside the projector has increased above the manageable
automatically. See Action 3 below.
8 A problem occurred when driving the color wheel inside the projector. See Action 4 below.
9 A problem occurred while operating the lamp. See Action 5 below.
Action Status Description
Disconnect the power cord and connect it again. Then run your
The cooling system in the projector.Ifthesamesymptompersists,contactyourlocalproduct
Action 1 projectorincludingthecoolingfan distributor or service center.
is not operating normally.