File name KOC970T&980T.pdf
DAEWOO ELECTRONICS CO., LTD.
PRECAUTIONS TO BE OBSERVED BEFORE AND
DURING SERVICING TO AVOID POSSIBLE
EXPOSURE TO EXCESSIVE MICROWAVE ENERGY
(a) D o not operate or allow the oven to be operated w ith the door open.
(b) M ake the follow ing safety checks on all ovens to be serviced before activating the m agnetron or other m icrow ave
source, and m ake repairs as necessary: (1) Interlock operation, (2) P roper door closing, (3) S eal and sealing
surfaces (arcing, w ear, and other dam age), (4) D am age to or loosening of hinges and latches, (5) E vidence of
dropping or abuse.
(c) B efore turning on pow er to the m icrow ave oven for any service test or inspection w ithin the m icrow ave
generating com partm ents, check the m agnetron, w ave guide or transm ission line, and cavity for proper
alignm ent, integrity, and connections.
(d) A ny defective or m isadjusted com ponents in the interlock, m onitor, door seal, and m icrow ave generation and
transm ission system s shall be repaired, replaced, or adjusted by procedures described in this m anual before the
oven is released to the ow ner.
(e) A m icrow ave leakage check to verify com pliance w ith the Federal perform ance standard should be perform ed on
each oven prior to release to the ow ner.
SAFETY AND PRECAUTIONS ... 2
SPECIFICATIONS ... ... 3
EXTERNAL VIEW ... ... 4
1. OUTER DIMENSION ... 4
2. FEATURE DIAGRAM ... 5
INSTALLATION ... ... 7
CONTROL PANEL ... ... 8
DISASSEMBLY AND ASSEMBLY ... 9
INTERLOCK MECHANISM AND ADJUSTMENT ... 18
TROUBLE SHOOTING GUIDE ... 19
MEASUREMENT AND TEST ... 25
1. MEASUREMENT OF THE MICROWAVE POWER OUTPUT ...