Now downloading free:TOSHIBA Installation Instruction

TOSHIBA Installation Instruction free download

LCD Liquid crystal display TVs

File information:
File name:	Installation_Instruction.pdf [preview Installation Instruction]
Size:	391 kB
Extension:	pdf
Mfg:	TOSHIBA
Model:	Installation Instruction 🔎
Original:	Installation Instruction 🔎
Descr:	TOSHIBA LCD 40UL975G Installation_Instruction.pdf
Group:	Electronics > Consumer electronics > TV > LCD
Uploaded:	24-02-2020
User:	Anonymous
Multipart:	No multipart

Information about the files in archive:
Decompress result:		OK
Extracted files:		1
File name Installation_Instruction.pdf How to upgrade the Software Whenever updating the Software, perform the "Media Player setup" as below. Otherwise software updating may not be stared. 1 Press the "MENU" button on the remote controller. Via LEFT/RIGHT or UP/DOWN button on the remote controller, select "Media Player" "USB Media Player" "Setup" Note; "Setup" may not be visible until you select it through "USB Media Player" menu. 2 Press the "left or right" arrow buttons to select the "On" as shown in figure2. Figure2 3 Press "EXIT" button on the remote controller to exit the "Menu". Copyright 2010 All Rights Reserved Page 1 of 4 4 Connect the AC power and turn "ON" the TV receiver. 5 The USB reader is located on the left or right of the cabinet near the side control/jack assembly as shown in Figure1. Figure3 6 Insert the "USB Drive" into the USB slot as shown in Figure2. Figure4 Copyright 2010 All Rights Reserved Page 2 of 4 7 After insertion of USB Drive into reader slot a firmware upgrade information window will appear as shown in Figure5. Figure5 8 If the window is no present, remove the USB Drive and try reinserting the USB Drive again. 9 Press the "left or right arrow" buttons on the remote controller to select the "Yes". Press the "OK" button on the remote controller. Following message will appear in sequence of figure 6 and 7. Figure6 Figure7 10 Press the "left or right arrow" buttons on the remote controller to select the "Yes". 11 Press the "OK" button on the remote controller to start the Software updating. Copyright 2010 All Rights Reserved Page 3 of 4 12 Following message will appease as shown in figure 8 and then disappear. Figure8 While the TV is upgrading no indication will appear on the TV screen but the upgrade is in process. This will take approx.3 minutes. DO NOT unplug the AC power to the TV or press any buttons on the remote controller or the TV keypad during this process. 13 Upon completion of the software upgrade, The TV will reboot automatically. 14 Following massage will appear again after 20 seconds as shown in figure 9. Figure9 15 Press the "left or right arrow" buttons on the remote controller to select the "Yes". Following massage will appear as shown in figure 9 and th

>> View document online <<

>> Download document <<

Was this file useful ? Share Your thoughts with the other users.

User ratings and reviews for this file:

Date

User

Rating

Comment

Average rating for this file: 0.00 ( from 0 votes)

Similar Service Manuals :
TOSHIBA lst packing - TOSHIBA manual+lcxx46fda - TOSHIBA Philips Channel Order - TOSHIBA lst packing - TOSHIBA lst acc - TOSHIBA lst u02 front av(pe0141) - TOSHIBA lst u04 key(pe0141) -

FB - Links - Info / Contacts - Forum - Last SM download : Telefunken TR 500 hifi

script execution: 0.02 s