File name ASC20140612001.pdf
Bulletin Date: 6/12/2014
Bulletin Number ASC20140612001
SUBJECT: Model/serial number label removal and replacement
Background: The model/serial number label is attached to the inner door on the new Water
Wall dishwashers. If the inner door needs to be replaced, order the appropriate part number
listed below. In addition, after you have replaced the door, the model/serial number label
needs to be removed from the old door and applied to the new door.
Model Number Part Number Part Name
DW80H9930US DD97-00234A Assy Door
DW80H9950US DD97-00232A Assy Door
DW80H9970US DD97-00233A Assy Door
Solution: To remove the model/serial number label, insert a razor blade under one of the
corners of the label and lift it up slightly. Then, grasp the uplifted corner and slowly pull the
This information is published for informational purposes only and intended for use only by personnel qualified for the specific tasks
depicted. Qualified personnel are those who, based on their training and experience, are capable of identifying risks and avoiding
potential hazards when handling or servicing a product. Only qualified personnel should repair products powered by electricity. Any
attempt to handle, service or repair the product or products by anyone other than qualified personnel could result in serious injury or
death. You agree that your use of and reliance on this information is at your sole risk. This information is subject to change or update
without notice. There are no warranties, either expressed or implied, regarding the accuracy or completeness of this information.
Before re-attaching the label, locate the correct position for the label on the door. Refer to
the picture below for the correct position.