LG LG 2006 Training Guide [SM] free download

File name LG_2006_Training_Guide_[SM].pdf

TRAINING MANUAL LCD DIRECTVIEW TELEVISION - 2006 Service Digital Display Published February 2006 by LG Education & Product Engineering Customer Service (and Part Sales): 1-800-243-0000 Technical Support (and Part Sales): 1-800-847-7597 USA Website: www.lgusa.com Customer Service Website: us.lgservice.com B2B Service Website: aic.lgservice.com Training Website: www.LGCSAcademy.com IMPORTANT SAFETY NOTICE This manual was prepared for use only by properly trained audio-visual service technicians. When servicing this product, under no circumstances should the original design be modified or altered without permission from LG Electronics. Unauthorized modifications will not only void the warranty, but may lead to property damage or user injury. All components should be replaced only with types identical to those in the original circuit and their physical location, wiring, and lead dress must conform to original layout upon completion of repairs. If any fuse (or Fusible Resistor) in this TV receiver is blown, replace it only with the factory specified fuse type and rating. When replacing a high wattage resistor (Oxide Metal Film Resistor, over 1W), keep the resistor 10mm away from PCB. Always keep wires away from high voltage or high temperature parts. Do not attempt to modify this product in any way. Special components are also used to prevent shock and fire hazard and are required to maintain safe performance. No deviations are allowed without prior approval by LG Electronics. Service work should be performed only after you are thoroughly familiar with these safety checks and servicing guidelines. Circuit diagrams may occasionally differ from the actual circuit used. This way, implementation of the latest safety and performance improvement changes into the set is not delayed until the new service literature is printed. GENERAL SAFETY GUIDANCE An lsolation Transformer should always be used during the servicing of a receiver whose chassis is not isolated from the AC power line. Use a transformer of adequate power rating to protect against personal injury from electrical shocks. It will also protect the receiver and its components from being damaged by accidental shorts of the circuitry that may be inadvertently introduced during the service operation. Before returning the receiver to the customer, always perform an AC leakage current check on the exposed metallic parts of the cabinet, such as antennas, terminals, etc., to be sure the set is safe to operate without damage of electrical shock. With the instrument AC plug removed from AC source, connect an electrical jumper across the two AC plug prongs. Place the AC switch in the on position, connect one lead of ohm-meter to the AC plug prongs tied together and touch other ohm-meter lead in turn to each exposed metallic parts such as antenna terminals, phone jacks, etc. If the exposed metallic part has a return path to the chassis, the