Samsung Troubleshooting free download

File name Troubleshooting.pdf

4. Troubleshooting 4-1 Failure Display Codes There is a error code and two kinds of error codes. Possible error codes during use can be checked before service. 1. Press CLOCK AM/PM pad. Clock 2. Press CLOCK AM/PM pad again. 3. Press a number pad. 4. Press START/SET pad. Start/set 5. Press CUSTOM COOK and number 0 pads at the same time for 2 seconds. Error codes are displayed. Custom Cook + 6. Press number 0 pad, the latest 5 error codes can be checked. But, if the oven turns off, the stored error codes are deleted. 7. Press CLEAR/OFF pad to return to normal display mode. Oven sensor error (Measure or Check tool : Multimeter) Failure code CAUSE SOLUTION 1. Disconnect power. Open the back cover. Disconnect sensor harness from control Measure sensor resistance oven sensor opened :1080 at the room temperature E-27 If there are any problems, replace oven (over 2950 ) sensor. 2. If there is not any problem with oven sensor, Please check whether there is a damaged therminal or wire on harness. Oven sensor shorted. E-28 (Under 930 ) 3. Check resistance of oven sensor connector on main PCB (Normal:2850 ) 30 4. Troubleshooting 4-1 Failure Display Codes Safety error Failure code CAUSE SOLUTION 1. Disconnect power. Open the back cover. Disconnect sensor harness from control. Measure sensor resistance:1080 at E-08 Oven heating error the room temperature If there are any problems, replace oven sensor. 2. Check the broil, bake and convection he