DE`LONGHI disassembly-BM350 free download

File name disassembly-BM350.pdf

Spares - BM350 Disassembly & re-assembly instructions Page 1 of 4 BM350 The following procedures are aimed to help with dismantling and service repairs. Always disconnect the appliance from mains supply prior to removal of the covers and suitably protect the finish on the casings. Click on the pictures to open a larger version in a seperate window. Raise the lid to remove. To remove the control panel assembly, undo the two securing screws indicated by the yellow arrows, then lever off at the points indicated by the red arrows. The BM250 control panel assembly is secured by three screws, two on the side and one at the back. This shows the main PCB wiring. The control panel PCB is fitted below. http://www.kenwoodservice.co.uk/product-files-kar/guide-BM350.htm 29/04/2009 Spares - BM350 Disassembly & re-assembly instructions Page 2 of 4 View with the control panel removed. The convector fan & thermistor position. http://www.kenwoodservice.co.uk/product-files-kar/guide-BM350.htm 29/04/2009 Spares - BM350 Disassembly & re-assembly instructions Page 3 of 4 To gain access to the internal parts, first remove the top surround which is secured by six screws. With the appliance upside down, remove all the base screws including the feet, then ease off the outer body. The chassis assembly is removed through the top. http://www.kenwoodservice.co.uk/product-files-kar/guide-BM350.htm 29/04/2009 Spares - BM350 Disassembly & re-assembly instructions Page 4 of 4 View with the outer casing removed. Please note: it is necessary to remove the outer casing when replacing the thermistor on the BM350, whereas on the BM250 the thermistor is accessible with only the control panel assembly removed. Twin thermal fuses 172