Samsung f76a-p-c7xxx-3-disas free download

File name f76a-p-c7xxx-3-disas.pdf

Disassembly & Reassembly 3.Disassembly&Reassembly 3-1 OverallDisassembly&Reassembly - Be sure to separate the power cord before disassembling the unit. - Discharge the capacitors first when separating PCB's with high capacity capacitors such as SMPS, X Main Board, Y Main Board, etc. (A spark may be generated by the electric charge, and there is danger of electronic shock.) - Check that the cables are properly connected referring to the circuit diagram when disassembling or assembling the unit taking care not to damage the cables. - Take care not to scratch the Glass Filter in the front. - Assemble the boards in the reverse order of the disassembly. - The plasma must be layed down on a flat padded surface for disassembly and reassembly. Description DescriptionPhoto 1. Remove 1 screw. : BH,+,S,M4,L10,ZPC(BLK),SWRCH18 *L : Screw Length(mm) 2. Push both side and pull the cord down to remove it from the unit. 6003-000337 Please lay the PDP unit face down on a soft surface when removing the stand. 3. Remove 5 screws. : BH,+,B,M4,L12,ZPC(BLK),SWRCH18 *L : Screw Length(mm) 4. Remove the Stand base. 6003-001003 Samsung Electronics 3-1 Disassembly & Reassembly Description DescriptionPhoto 5. Remove 21 screws. ( ) (50" PDP) Remove 22 screws. ( ) (58"/63" PDP) : BH,+,B,M4,L12,ZPC(BLK),SWRCH18 *L : Screw Length(mm) 6003-001003 6. Remove 6 screws. ( ) : BH,+,S,M4,L10,ZPC(BLK),SWRCH18 *L : Screw Length(mm) 7. Remove the COVER REAR. <50" PDP> 6003-000337 6003-001003 <58"/63" PDP> 6003-000337 8. Remove 4 screws. ( ) (50" PDP) Remove 6 screws. ( ) (58"/63" PDP) : BH,+,S,M4,L10,ZPC(BLK),SWRCH18 *L : Screw Length(mm) 6003-000337 9. Remove 2 screws. ( ) : BH,+,B,M4,L12,ZPC(BLK),SWRCH18 *L : Screw Length(mm) 10. Remove the Bracket Support Stand. <50" PDP> 6003-001003 6003-000337 <