AMD MKCDREC free download

File name MKCDREC.pdf

AMD GeodeTM SP4SC40 System Platform Restoring a Linux Hard Disk Using MKCDREC Software 1.0 Scope This document discusses the procedure for restoring a The CD will boot the MKCDREC software and load the ker- complete Linux image using the bootable CD included in nel. Ignore all messages until the following command line the AMD GeodeTM SP4SC40 system platform kit. The appears: Linux software used to create the bootable CD image is I have no name!@localhost:/ # called MKCDREC. The software is "free-ware" and more information on MKCDREC can be found at the web site: Follow the instructions shown below. Some non-important http://mkcdrec.indyramp.net. The purpose of the Linux output messages are ignored. (<) designates enter com- image is to verify that the SP4SC40 platform and plug-in mands. Press the Enter key after typing each command: cards included in the kit are functional. < cd /etc/recovery < ./clone-dsk.sh 2.0 Procedure Press [Enter] to continue or [CTRL-C] to abort: < Enter 2.1 Verify the Boot Order of Drives Follow the procedures for setting up the SP4SC40 as mkCDrec_v0.6.1 - Source disk to restore described in Sections 2.1 and 2.2 of the AMD GeodeTM Enter your selection: SP4SC40 System Platform User's Guide. The hard drive must be at least 4.3 GB. The LPC (Low Pin Count) card /dev/hda (size: 39088896 Kb) and floppy drive should not be installed, and the boot order Please choose from the above list [1-1]: of drives should be left at the default state: <1 1) Floppy drive (Should not be installed) Is disk /dev/hda already formatted (manually)? [Y/n]? 2) CD-ROM drive (Installed in Primary IDE as Slave)