HDD0x0 Main Board exchange
Power on the device
After powering on the device the Philips logo should be visible on the screen.
Press the "Vol-" key together with the "Cursor Right" key
The LCD will now show the following :
and after about 2-5 seconds it should also show HD init'zed. During the initialisation
sequence, backlight of the device will be activated. After the disk start sequence is completed
the backlight will be turned off, and you can proceed to the next step. LCD now shows as
1/8 DE10JUN 09.11.04
Connect USB cable
After the HD is enabled, connect the USB cable to the PC. Within about 15 seconds it should
show as a drive letter in the windows explorer.
If old files are stored on the disc, delete them or format the disc, to get an empty device.