| Subject | Text |
| Maybe this wire plugs onto the CRT board on the back of the tube? |
| If HV stays on check CRT for weak emision. This will cause sony TV's to blank out the video. |
|
|
| Viewpoint | Hi everybody!
Do You know anybody where I find service manuals for
CRT monitor Viewpoint VP2110VB |
| National Model TC-2186 MR -Display powers off after 10 mins | This TV has been operating problem free up to end 2004 (purchased 1991).
Has developed this probl |
| Anyone Reply me plz | I want orion 77151A color tv IC LA7800 horizental section daigram or full daigram and also needs E.H |
| Look on the crt sockets. |
| maybe i am getting hosed? | Hi Larry -
They would charge me $369.50 for labor, and $80,00 for parts.
It was an in-home visit |
| Can't adjust red convergence APEX projection TV | I'm working on an APEX model GB5108 rear projection television. The red picture is pinched slightly |
| Bright | There is a black transformerwith a red wire coming out of the top and attached to the back of the CR |
| re; too bright | Hi, try turning the "screen control" counter clockwise a little, I
don`t work on monitors so I`m no |
| 6 LED FLASHES CRT FAULTY.
6 LED FLASHES FIELD CHIP PINS.
check the soldering of the field chip at |
| I think you misunderstood me about the plug. The plug I was takling about is at the rear of the CRT |
| Could be a bad CRT. Have you tried uplugging CRT board? If power remains on, there's your problem. U |