| Subject | Text |
| Need help with replacing a board in a lg plasma | Hey guys
I just joined up here. I was given a LG plasma t.v (42PC3D) because the screen stopped |
| TV SET REPAIRS | :D If you are in any doubt as to your ability to undertake any tv repair-dont!!!
There are certain |
|
|
| power failure | what's the cause for letting no power in the secondary side of an SMPS power supply. there is power |
| FSB228-3F01 | I also have the bad capacitor problem; my tv will not even turn on. I found C33 was most impressive |
| leoptics 15c (Picture sides bent inwards ) | Picture sides bent inwards
asking for,
brand=computer monitor- leoptics
model= 15c
problem= dea |
| Service manual for Onkyo PCS-207 stereo system. | Hello,
I am trying to find information about power transformer used in PCS-207 personal stereo syst |
| part numbers.... | Hi Minnie,
I didn't know about "partstore". Their prices are good. If they are listing |
| Varying degrees of electronic knowledge | I've Noticed That Users of the site have varying degrees of electronic knowledge it would be helpful |
| Hitachi 50" projection TV - Fix, Trash or sell parts? | I have a Hitachi 50" projection TV model 50UX58B. I purchased it Jan 1999, so I would assume it woul |
| LCD sets are still board replacement only. Most manufactures don't even provide schematics for the b |
| Protect LED | My Hitachi 50FX30B had been dead for quite a while, but this weekend I took some time to go over it |
| Move to the quiet side of town |
| I had the same problem and I solved in this way (cut & paste from nl.hobby.video newsgroup messa |
| Re: Looking for Samsung SV-5000W video head | [quote:27c9999426="vtech"]
WAIT...may not be the video head as it was a common problem with a lot o |
| Please Dodgey, can you help me
Do you have any picture of the other side of the power supply arou |
| 3 modules in it. Power/sweep, video, and convergence. #1 replaced is where I led you. I can't guaran |
| The "bastard chassis"! The whole metal 'box' has to come out. The power supply is on the l |
|
|
| Service Manual for PC monitor Fujitsu FPC-CRTAAD | Hello to everybody out here in this forum,
l would like to seek help with the above.
l have thi |
| HITACHI PROBLEM | HELLO, Both of these gentalmen are right, however don't forget the H.O.T this transistor is a comm |
| Probably you blew the switch-mode transistor in the power supply, it would have also damaged the dri |
| Many Many THANKS!
I made the changes as outlined. I CAN NOT believe I have lived with this issue th |
| Thanks for the warning mark.
I did put a load on each of the pins to make sure that it resonates |
| Sony GDM500PS - Please HELP: red signal fluctuations | Hello.
This is actually monitor with Sun logo that came with SPARC workstation. Its FCC ID is AK8 |
| Imagine that. A 22-year-old set that has some "quirks." Does the set work correctly both b |
| re; width problem | Dietrich, this ones a little harder, check solder connections in and around the horizontal output tr |
| probably the belt is not turning the reels of the tape when you put tape in it thinks that the tape |
| Is the main fuse blown?
If yes, there's a problem in the primairy side of the power supply.
If |
| Pioneer plazma | Ive sent them like 10 boards,they are very professional,but sometimes a bit pricey.I buy broken lcd |
| yeah! tv still working but, always need to push the reset button in front. otherwise no signal with |
| Sharp LCD tv: LC42D72u | It has the green opc/power flashing light problem. The power and opc light flash 2x together (1 sec |