| Subject | Text |
| I tested it in-circuit and the results I got are 4.91 V input and 3.26 V output.
The small capac |
| Ok so I have been dealing with ALOT of these. I buy broken TV sets and fix then re-sell
Viewsonic |
|
|
| model 5700 (infocus) | Could anyone tell me if the 100uf cap that is right inside the heatsink is listed as c16 and is a 16 |
| Re: code Ford Visteon CDR4600 please. | [quote:f38c2ffbe1="joe.matias"]I need please code from my card
He is a Ford visteon CDR 4600
Y |
| Thanks for the input, I was able to get the laser focus to work, and then it crapped out on the sled |
| Bad green tube or screen/focus block. |
| [quote:7c03f7aab0="jts1957"]Jumpers, especially at locations 010 and 050 - resolder. Check F850, F85 |
| Help with my Half Screen on 50" NEC PlasmaSync MP1 | I need - help can you send pictures to [email protected]
[quote:b6b800d6e2="Anonymous"]Wil |
| CS19 220UF/35V
CS20 220UF/25V
CS21 1500UF/16V
CS22 1500UF/16V
CS23 1000UF/25V
CS27 1000UF/25V
|
| Re: Help with CODE Radio Ford MD 4500 | [quote:b5fbf5cfd1="romeu"]I need help.
It's a radio tape deck Ford MD 4500
And I need his CODE.
S |
| on the flyback transformer the top control is the focus control adjust for sharpest picture |
| Well i asume those 2 componets ARE the fuse. I removed the second componet ont eh topside that was s |
| Call for t-shoot oppinion and where to find BA6996FP | Never noticed the picture but looking at it I see an electrolytic capacitor 47uf, 16v next to the i. |
| change c14, c14a (2200mfd 10v) c18 c19 (1000mfd 16v)in the psu, if that does not restore operation r |
| Try replacing C520 220uf @ 16v. |
| Site for wiring guide | Check here: http://www.installdr.com/QuickWiring.html
Look under FORD wiring diagrams. |
| you have problem with lazer lens contack , you must first align the focus in-order that your unit ca |
|
|
| One's the focus and one's the screen. What kind of tv? |
| Sony CDP E200 monitor help | Hi,
I hope there is a knowledgeable and experienced tech out there who can help me track down the c |
| It works! Thank you all so much!!! | In case any of you who contributed to this thread are still reading - a BIG thank you for all your i |
| Bosch Fridge/Freezer Not Working | I had this problem with my Bosch Fridge/Freezer. The compressor was receiving half-wave rectified a. |
| Re: 60 inch Zenith projection tv starting to blurr out, Fix | [quote:a37d602a74="RJ"]Nine year old 60 inch projecton tv starting to blurr out. Better to fix or g |
| 6-year old Sony rear projection tv model( kp-53s75) | Currently my Sony 53" tv has suddenly lost its picture quality. The colors are not converging t |
| [quote:627ac39644="FalconFour"]Thanks!! :D
I already replaced the two resistors RP30 & RP31; |
| Service manuals are worthless!!! Check C9B01, C9B02, C9B10, and C9B11 (1000 uFD 16V) on the DM PCB. |
| i found problem.i replaced C827: 4700uf/16V .
this cpacitor was not short-cicuit but it was leaked. |