| Subject | Text |
| cpt101 | Q 330 is the muting transistor (KRC103) which goes faulty also change the jumper wire JW307 to a 47 |
| Sony DVD Player, DAV-SC6 - Stuck in Standby | I have a Sony Compact AV system model DAV-SC6 and it is stuck in standby with the 'standby' message |
|
|
| Problem with Pioneer VSX-d337 | Bought this Unit new same Years ago, probably used it no more than 20-30 Hr's since then, bought onl |
| Sears 509-14370 TV, chassisA67 | Sears 509-14370 TV, chassisA67, made by JVC, the board is labeled CKF0822-DU3-1. TV turns on when f |
| diagram | I have the crt panel-diagram.I can send it to you if you like.
PS : 1)also check the vertical def |
| Maybe you could sell your daughters and buy a big screen? LOL
Sorry:)
I am not familiar with y |
| Dead Dell 1025HE | I'm attempting to repair a Dell 1025HE 17" monitor (essentially a Nokia 447S) for a friend.
sympt |
| i`m currently making the same sort of project for my cars thermal fans , Two stage temp cut in cut o |
| Toshiba tz61v61 problems. | tv shuts of, power light blinking. used to be able to unplug/replug and get it working but that does |
| conv 9-1690 | Just fixed one of those 1690..service notes state replace ic s .. I would check r4151 1k off pin |
| Panasonic CT32SS31 power | I have for repair a CT32SX31 set. I have no HV but power. When I plug it in I hear a high pitch and |
| so ive tested the relay. apparently is good.
its giving me infinite on the open part of the rela |
| :D CHECK IF YOUR SET HAS "AK-19" ON THE BACK PRINTED LABEL WHERE IT SHOWS THE MODEL NUMBER OF THE SE |
| Do you have a remote and does the volume work on it? If yes, it may be the rotary encoder itself? If |
| More news:
Probably isn´t TDA 8361 ( I´ve got signal out via SCART) and the TDA 3653 it& |
| Zener 6079 (9.1V) is shorted. R3045 measures 1.8 ohms.
If anyone else needs to know in the future, |
| Not even a late-comer? Good god this place is a ghost town.
All the capacitors in the area check |
|
|
| Replace the M-board and 330K ohm and 470K ohm resistors at the A-board. (I gues R6018 + R6019, they |
| [quote:20c42c88bc="joshg3p0"]I can test the other transistors for short. I think I did that, but I'l |
| Hello, check the resistor value of the pin 21 and 22 of the flat cable lens.
If this value is to of |
| Re: 50" zenith tv convergance issue | [quote:5df3b9f13b="riverdale"]I have a 50" zenith television that i just replaced the hv splitter an |
| Re: Goodmans GTV42P3 42" Plasma TV - Power Board Repair | [quote:ba34fe886c="Mad Professor"]Good Day All.
I have a 3 year old Goodmans GTV42P3 42" P |
| 50" zenith tv convergance issue | I have a 50" zenith television that i just replaced the hv splitter and focus block on. Originally, |
| Denon DRA-685 Remote Volume | Hello,
I replaced the two 1 Ohm resistors in the +&- 15V lines as Mitch suggested and the &qu |
| Forgot to say R629 should be 2.7ohm for 90 degree crt, 27 ohm for 110 degree crt, |
| Neufunk TV 34BNA Futura,instruction manual | Hello,
I just repaired a Neufunk tv 34BNA ,which had a white screen and flyback lines across the |
| Daewoo DV-K813 VCR video loses time at power cuts (battery) | Hi, I am writing this to help anyone who might have had the same problem as me. I bought a great Dae |
| 90% regulation power solver replacements are as follows:
C4108--39 mfd/100 volts--RCA #208002
C4 |
| Fusible resistors better than Fuse in TV Power Supplies??? | I saw the fusible resistors ( typically 1/2 watt. .1 ohm rating. Sony #1-202-933-61 ) used in a lot |
| [quote:93e26ac61b="vtech"]Depends on your Amplifier drive capability; while it is not too far off, |