Subject | Text |
My Tv just did the same thing | What I found was that the fuse was blown, I replaced the fuse plugged it in and once I powered it u |
Metz ch696G1 dead | Hi,
The set is totally dead. No light in standby led.
I've found some defective components and |
|
Re: ERROR CODES | [quote:5ccb71ce8c="1591"]Here is some error codes.Take a look.
Error code 20. Four LEDs flashing] |
Rinex diagram tda 4605 | Please help need diagram for a rinex tv uses the [size=18:d72a620e0b][color=darkred:d72a620e0b]tda46 |
ERROR CODES | Here is some error codes.Take a look.
Error code 20. Four LEDs flashing]. Replace microprocessor |
| Check resistors around TDA4605 - R which go on 2 and 3 pin
Regards |
| Not familiar with the set, however looking at TDA4605, pin 7 is generally used as a soft start by m |