Subject | Text |
| Solder up the verticle ic. Not cold joints, bad solder joints. Once and for all wave soldering sucks |
| Are the units identical? The Ford 6000CD car stereo has been manufactured for many years by at least |
|
| maybe button not working?has control been dropped,maybe crack on part of circuit board?have you chec |
Samsung SP42W5HFX Conversion Fault | I have been given a Samsung SP42W5HFX with a conversion fault.
I bought 2 IC chips and took the boa |
| i think it's just the convergence. the red gun won't move side to side only up and down and the blue |
Tv sound ok but picture is collapsed and with lines | My Crystal Tv Model CT-2900 , sound is ok but the picture somewhat collapsed & with many lines i |
| By connecting a half wave rectifier in series with a resistive load, you will get the half effective |
NEC PX-50XM1A aka 50MP1 | I got this plasma and a spare identical parts unit. The parts unit had been dropped after it suffer |
| Thanks for the reply vtech.
I've already downloaded datasheet of MP1010BEF from the IC manufacter |
Sony u/s | Hey, puny earthling- I would suggest that the I.H.V.T is faulty( but could be s/c other comp, incl f |
Re: code for mitsai tvs | [quote:12cb3963c1="friend"][quote:12cb3963c1="tidonis"]i need the code for the mitsai aura 51cm remo |
| Just because a transformer has a mess of pins, does not mean it has to use all of them. :wink:
AC |
| Hello
The microwave work sometimes in the 'Hi' position and not in the 10 to 90 position.In the pos |
| Re soldering PROM IC Q710 on DSP board was a typical fix for various brands/models. For whatever rea |
hitachi 50ux58b | my 50ux58b has a red ghost (double exposure )on the left upper side of the screen in a wave pattern, |
| Another method of testing small capacitors in the range of some tens of picofarads is to connect a p |
Metz TV Classic 100hz PIP 693G1 Picture deformation | I have picture problem with my TV.
Somethimes dont show pic only ton works and flyback trafo(HV).I |
|
bk 2125 oscilliscope | Hey all, I am new to the forum, and new the wonderful world of electronics. I just purchased a bk |
| Help same TV . mine has black wave vertical line in both end |
| I think you should use a PLL solution. Build a VCO (voltage controlled oscillator) which can deliver |
problems on AV-Video | I need help with my SANYO c20bg2txn model!! :(
each time I connect any input souce(decoder, video. |
panasonic tv | May I respectfully suggest that your tv needs professional attention(there is nothing you can do as |
| Follow up: I did manage to track down the fault after replacing the cascade and HV transformer at gr |
Re: AV RECEIVER Yamaha RXV3800 DC PRT:000 | Dear sir,
I have exactly the same problem, have you solve it, I've measure different Cap on Ram b |
sharp 20cn1 | my sharp 20c-n1 tv got a complaint ie,there is a wave motion in picture once i turn it on ,but after |
| I don't think the filter capacitors should be affected, it is more likely that the problem is leakag |
Re: renault laguna 2 | [quote:9799ccf387="AgnesSki"]Hi :)
I need radio code. Please help me.
MODEL NO: 22DC277/62
T0Y411 |
Pioneer Stereo Receiver SX-1100 | Hi I have an old Pioneer Stereo Receiver SX-1100 not too long ago I was running a set of speakers on |
Horiz output | Ahh I get it now,
I would like to scope the base signal while lamp load is on and measure frequency |
GRUNDIG AMIRA 32LW82-7505BS does not start | Hello, GRUNDIG AMIRA 32LW82-7505BS does not start, I opened the beast I saw waving: FSP204-2F01 (S07 |