| Subject | Text |
| SONY KV-2063R Television | I'm likely not the first to inquire into problems with this particular model of TV.
Here's a brief |
| Bush TV frame collapse | Bush2867NTX TV Frame collapse - white horizontal line across middle
of screen. Been suggested check |
|
|
| I need Schematic for TV-Philips FSQ Vision TXT | I need Schematic for TV-Philips FSQ Vision TXT
Model 15CE1510/08B
PM048848 035762
Cha |
| Flat Screen | It is a CRT screen that is perfectly flat. If you would like to own one, check out www.FreeFlatScre |
| A CRT (picture tube) have 3 electron guns,each with their own filament, (heater) so you should see a |
| Sony KPR-36XBR | Just bought this at a sale. Brought home, set came on but had contaminated green crt fluid. Changed |
| LG CN-27A24G | TV marks LG, but it has TRC Philips and chassis ZENITH, the IC STR53041, I need the scheme, beforeha |
| Fuse? | Thanks - I really appreciate the response. Now that I've pulled the beast from it's perch, all I ha |
| Service manual for Sony KV27V36 | Hi, I need a service manual for a sony KV27V36 TV. I had the tv apart and cannot seem to locate the |
| Maybe this wire plugs onto the CRT board on the back of the tube? |
| If HV stays on check CRT for weak emision. This will cause sony TV's to blank out the video. |
| I need service manual or schematics for T.V Sharp 20" | HI :)
I need service manual or schematics for T.V Sharp 20"
Model DV-5150S CHASSIS: DUNTK 7090BM. |
| Viewpoint | Hi everybody!
Do You know anybody where I find service manuals for
CRT monitor Viewpoint VP2110VB |
| National Model TC-2186 MR -Display powers off after 10 mins | This TV has been operating problem free up to end 2004 (purchased 1991).
Has developed this probl |
| resolder all joints in the line output stage, check R629 (27ohms, 1/2w 90 degree tube)(2.7ohms, 1/2w |
| If you told us the model number, or the chassis number,
it would be easier to point you in the rig |
| Look on the crt sockets. |
|
|
| maybe i am getting hosed? | Hi Larry -
They would charge me $369.50 for labor, and $80,00 for parts.
It was an in-home visit |
| Can't adjust red convergence APEX projection TV | I'm working on an APEX model GB5108 rear projection television. The red picture is pinched slightly |
| Daewoo DTQ-20V1 is a chassis CN-001M.
Check this file:
http://www.eserviceinfo.com/download.php |
| hi,
i don't know what is the chassis :(
in fact i just need to know the original default setting |
| Bright | There is a black transformerwith a red wire coming out of the top and attached to the back of the CR |
| re; too bright | Hi, try turning the "screen control" counter clockwise a little, I
don`t work on monitors so I`m no |
| 6 LED FLASHES CRT FAULTY.
6 LED FLASHES FIELD CHIP PINS.
check the soldering of the field chip at |
| Hi this is a Sony D99 chassis and the flashing of the Amber LED indicates the fault area.
D99 LED F |
| Re: Need Schematic Diagram monitor Philips 107s | [quote:03c22876f5="MikoBG"]Philips ID 17C2321N/00Z made in Hungary
chassis: 9300.2 WK:9803 ???????? |
| Philips LCD 37PF9986 or 42PF9986 | I am looking for the service manuals for these Philips LCD televisions. Chassis is EMG Top. |
| I think you misunderstood me about the plug. The plug I was takling about is at the rear of the CRT |
| Could be a bad CRT. Have you tried uplugging CRT board? If power remains on, there's your problem. U |
| Hello, you must change the chassis assy.
The code number is A7018245B.
After make the adjustment.
|