| Subject | Text |
| 110 and 220 volts 50 and 60 Hz | I think that what you mean is that some adaptors cover all standard voltages between 90 and 270 Volt |
| Sony GDM 1950 Fixed Frequency Monitor | Hi guys
I have tinkered for quite some time now with my old Sony GDM1950 to get it to work with
t |
|
|
| 50" zenith tv convergance issue | I have a 50" zenith television that i just replaced the hv splitter and focus block on. Originally, |
| :idea: Aaaahhhhhaaaaaaaaaaaa! I see now how the spindle motor could be the cause for the whole mess |
| Replace vertical ic and STILL have lost the top and bottom 2-3 inches of the screen......Like the pi |
| [size=18:5b0f8755cd][/size:5b0f8755cd]PIP = picture in picture . With the inputs to the tv wired pr |
| Thanks for the input, I was able to get the laser focus to work, and then it crapped out on the sled |
| Another method of testing small capacitors in the range of some tens of picofarads is to connect a p |
| Sharp 14D-CM Service Manual | l need the service manual for the above model.
Need it to troubleshoot my tv.
Tuner with hiss so |
| 1. That depends on what kind of high power amplifier you have built and what its purpose is (i. e. a |
| Samsung SCC-101AP surveillance camera sony super had REPAIR | Further question: Has Sony Super had sensor system 2 different input voltages, one 5v for the sensor |
| Black band on TV | I have a Panasonic 28PW6518C widescreen TV and since installing a Humax Freeview box a thick black b |
| Here's a copy / paste reply to two previous posts. Suck out any pertinent information you can use:
|
| SLEH790 SLEH770 Compatibility Problem??? | Hi,
I had a Technics 5cd SLEH770 model but my friend damaged the cd changer.i got my hands on a SLE |
| Hi,
The DC offset is a marginal voltage at the ouput of an electronic stage. In theory, there sho |
| 7" TFT monitors, white screen | Now I have to repair a dozen of 7" TFT monitors (like automotive rear seat entertainment or tru |
| Here's a copy / paste reply to a previous post. Suck out any pertinent information you can use:
|
|
|
| I/O extenders for 8051-compatible microcontrollers | I am woorking on a project, based on 8051 compatible microcontrollers and i need many input/output b |
| sony kp53s15 | Great OZ,
I need your assistance Sir. I saw your input about a power supply problem on sony kp5 |
| 5V to 3.3V micropower voltage regulator | hello,
For a microcontroller programmer using USB port ineeded to convert 5v to 3.3V,initially one |
| philips t.v. 43pp925 video inputs not working | I have a philips rear projection tv model no. 43pp925. All my video inputs are not working in the ma |
| Isolation txformer is basically a 1to1 ratio device that only seperates the two ground planes . Yes |
| RF connector for tuner.
Reattach the original "stub" to the tuner being very careful ab |
| LG RZ-20LA70 LCD TV | A 20" LCD TV recently came into my hands that unfortunatley is just out of warranty. The unit stays |
| iPod Boombox DIY Help- Audio problems | I am just starting to get into audio work, and started by taking apart a standard crummy boombox and |
| YOU could always try changing YOUR sets aspect ratio and see if it does or does not affect the bars |
| I agree with Miguel. if your mixer has PAN controls just turn all of them to the same end so your ch |
| car audio harmony - rover | Does somebody have shematics for (vdo or philips) harmony car audio system in rover, specialy for it |
| 1st item) Because you don't seem to have any high voltage, I'll would start by checking the HOT (lar |
| Re: HDTV....... | [quote:21dfb768d7="60inchhdtv"]HDTV :
High-definition television is a digital tel |