| Subject | Text |
| Usually bad soldered joints, we 'call dry joints' that are dull Grey looking with cracks around the |
| Well, I rushed here to post about my latest "progress report" of torturing the A board jus |
|
|
| Re: 106 Radio Code Help Please | [quote:eb6f207cde="compact57"]After a radio code for a 106 please. CL0401Y0213031
THANKS[/quote:e |
| Sony 8mm Video Head | Hello,
I just listed all my EV Series service manuals on Ebay in my Store.Also i might have |
| Shit! didn't want to do this but here we go.
Be sure to input the correct signal format for the d |
| MATSUI 32WN20 | HEY WONDERING IF ANYONE CAN GIVE ME SOME ADVISE. NOT SURE IF IT'S A FRAME COLLAPSE, BUT MY TV CUTS O |
| Half Screen | I think the monitor is made by KDS and noticed the nanual is available from this site. Just type in |
| Yes, its a CRT and i think your right, i have gone checking the horizontal circuits and they work, i |
| Re: Please decode my clarion | [quote:a85b4c9602="macrosoft"]Model : PU-9971 A
Serial number : CL0267V0123062
Thanks[/quote:a |
| W322NS Service Mode. | This is thanks to another website.
Goodmans TV Model: W322NS
Procedure to enter sevice mode
Swi |
| set bass to max treble to min, press down on keyboard and at the same time press index button on rem |
| No screws on LCD monitor...how do i open it up? | Hello, I have a 22" Acer LCD screen that I bought to use as a digital picture frame. I had a cu |
| Re: JVC AV-28W going into standby mode automatically | [quote:80c97ef9a6="stormme66"]Hi all,
I have a JVC AV-28WFR1EKS which is sick! After being turned |
| vestel 11ak45 | :( :( 11ak45 stuck in sby any ideas changed loptx opto frame chip psu thanks ph |
| Big screen tv's,in general. | I thought i hit a GOLD MINE one day-I looked outside in the a.m.,thought i was hallucinating...but n |
| Wharfedale 400ht dvd / dab home cin | Hi One and all,
I have the Wharfedale 400ht dvd / dab home cin.
have a small problem with it but |
| turn set off, under flap are 5 buttons , press and hold middle button turn set on while holding butt |
|
|
| Intermittent loss of picture | Check to see if the CRT filament is still present when you loose the picture, if it's missing resold |
| Yes you are right, it does not say on the videocover but this may be your problem. If you have tv in |
| hi, the problem with your frame is a simple resistor failure it is hard to explain which one it is b |
| Sony KV-M1400 Tuning - How To | I emailed Sony Tech Support. They photocopied the page of the manual which describes how to tune it. |
| http://stores.ebay.com/Cobras-Corner_Category-2_W0QQcolZ4QQd | Hello,
I am in the process of selling all my Service manuals.I have listed over 90 on eb |
| A bit confused | When I debated with the TV guy about burn in (I thought he was going to blame me for the damage) I a |
| Monitor KFC CB1516CL dead power | I have a problem with power block. It have UC3842 but with many back connections. I need a manual or |
| Hi !
Have you checked electrolyt capacitors in Power Supply and
frame stage? Try. |
| envision 7100-e lcd monitor | I dont have the answer to your question.
I do have my own - how do you open the frame?
After re |
| Saba Ultracolor Television Programming | Hi Everybody!
I have an old Saba Ultracolor television. M 55 U 75 and 6.625 U 89 are written on t |
| Thanks for all your suggestions. Not watching the videos is just not an option I'm afraid, as apart |
| Ness electronics
Logout | View Cart | Check Out | Online Store | Contact Information | Account His |
| monitor prob | The flashing usually means an error code depending on how many flashes and pauses I dont know this p |