| Subject | Text |
| Fisher TAD-M37 need scheme | totally dead, i need some info for start repair.
good power supply, 5v on MCU but...
regards, a |
| NEED service manual Yamaha RX-930 Stereo Receiver | I need service manual for yamaha rx930 rx-930 . please share!
if any one have it, please tell me |
|
|
| 7997 no working:(
eeprom?
MCU? |
| envision 7100-e lcd monitor | I need a part number for u302 for this monitor as I dont have a schematic. Think its an mcu. compone |
| Hello
I am attempting to control a small DC motor (on/off one direction
only)
with an avr micro |
| HI,
In many cases the white screen I have founs that replacing a SMD capacitor placed on the LVDS |
| I can save you some time there is not much out there. I know how to search on Google. I don't want |
| I think you missed the part where it said product# LT776s or model 780. Those are the 2 numbers on t |
| moving message display | hi dear i want to build a moving message display for my own shop but i have no knoweldge about this |
| [quote:17953b9f1a="krasisavov"]On this model is MCU SC401697CfU2 and EEPROM 24c08. I cannot find dat |
| Philips 29PT700B/00 CHASIS GR2.4 Remote control problem | Hi All,
Model: Philips 29PT700B/00 CHASIS GR2.4
Problem: TV does not respond to the IR remote |
| Code for MOPAR | Hello,
I need to help:
Radio:MOPAR
HW Ver: 20151111
SW ver: APP 1.9.9.4 MCU V2.0
BT Ver MC56-S |
| dump for FORD 6000 CD RDS EON - autoradio | Kolegi triabva mi dump za FORD 6000 CD RDS EON, MCU MC68HC11PA8, model: 97AR-18C815-AC. Blagodaria v |
| Mag 17" monitor start-up circuit question | I have a Mag monitor that I'm looking at. I don't get 5V to the start up citcuit. The 12 v are all t |
| Re: Chassis PT92 | [quote:92d3a70552="Wraith"]Dead EEPROM 24C16W6. :(
Need the .bin file for it.
MCU: TDA935 |
| evertone tft3202 service mode | hi help plise ned enter service mode
Producer/ :evertone
Model No :tft3202
Chassis/Model šas |
| [quote:40a845b458="elmir"]Hi
3189 no working:(
There are 2 eeprom: M95320 smd + 25P10 smd
W |
|
|
| resold T753, T751 and T601. no change
is it possible that the MCU is malfunction? |
| problem is in mcu placed on AD board, it require replace of that mcu |